Subject: [PATCHv5 00/35] ARM: OMAP2+: PRCM/SCM cleanups against 4.0-rc

From: [email-masked] (Tony Lindgren)
Date: Mon, 30 Mar 2015 18:25:27 -0700

* Tony Lindgren <[email-masked]> [150330 17:15]:
> Hi Tero,
> 
> * Tero Kristo <[email-masked]> [150320 11:45]:
> > Hi,
> > 
> > v5 contains the following changes still:
> > 
> > - re-ordered patches a bit, the single clock driver fix moved to beginning
> >   of the set, waiting for a separate merge from Mike
> > - Changed patch #23 to fix the slightly misleading logic (removed the extra +1)
> > - Changed patches #16 and #18 to fix OMAP2/3/4 etc. only builds
> > - Fixed ti81xx boot issues (hopefully, I don't have access to hardware
> >   to test it)
> > - Changed control module DTS layout based on discussions with Tony, this
> >   includes addition of minimal l4 bus (patch #25+)
> > 
> > Testing done for v5:
> >  1: am335x-evm      : boot
> >  2: am335x-evmsk    : boot
> >  3: am3517-evm      : boot
> >  4: am43x-epos-evm  : boot
> >  5: am437x-gp-evm   : boot
> >  6: omap3-beagle-xm : boot
> >  7: omap3-beagle    : boot, suspend (ret/off), cpuidle (ret/off)
> >  8: am335x-boneblack: boot
> >  9: am335x-bone     : boot
> > 10: dra7xx-evm      : boot
> > 11: omap3-n900      : boot
> > 12: omap5-uevm      : boot
> > 13: omap4-panda-es  : boot, suspend (ret), cpuidle (ret)
> > 14: omap4-panda     : boot
> > 15: omap2430-sdp    : boot
> > 16: omap3430-sdp    : boot
> > 17: omap4-sdp-es23plus: boot
> > 
> > Branch available at:
> > - tree: https://github.com/t-kristo/linux-pm.git
> > - branch: 4.0-rc1-prcm-cleanup-v5
> 
> I found few more issues regarding diff of the dmesg before and after,
> you may want to diff also dra7 before and after.
> 
> Then I just noticed this series won't boot on omap3 with the legacy mode.
> You can test this by building a uImage with the following command:
> 
> $ mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 \
> 	-n "Linux" -d arch/arm/boot/zImage /tmp/uImage
> 
> Then make sure you're not passing a .dtb file.
> 
> Below is the error I'm getting with debug_ll + earlyprintk enabled.

Also noticed a make randconfig build warning:

arch/arm/mach-omap2/prm_common.c:702:35: warning: ?scrm_data? defined but not used [-Wunused-variable]

That seems to happen at least with the following selection:

# CONFIG_ARCH_OMAP2 is not set
# CONFIG_ARCH_OMAP3 is not set
# CONFIG_ARCH_OMAP4 is not set
# CONFIG_SOC_OMAP5 is not set
# CONFIG_SOC_AM33XX is not set
CONFIG_SOC_AM43XX=y
# CONFIG_SOC_DRA7XX is not set
CONFIG_ARCH_OMAP2PLUS=y

Regards,

Tony

> [    0.000000] PC is at regmap_read+0x10/0x60
> [    0.000000] LR is at clk_memmap_readl+0x34/0x54
> [    0.000000] pc : [<c03f2c88>]    lr : [<c0035694>]    psr: 200001d3
> [    0.000000] sp : c08d1e90  ip : 00000000  fp : 00000000
> [    0.000000] r10: c07efaa8  r9 : 00000040  r8 : c601c5c0
> [    0.000000] r7 : c601bbc0  r6 : c601c5c0  r5 : 00000040  r4 : 00000001
> [    0.000000] r3 : fa004000  r2 : c08d1ea4  r1 : 00000040  r0 : 00000040
> [    0.000000] Flags: nzCv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
> [    0.000000] Control: 10c5387d  Table: 80004019  DAC: 00000015
> [    0.000000] Process swapper/0 (pid: 0, stack limit = 0xc08d0218)
> [    0.000000] Stack: (0xc08d1e90 to 0xc08d2000)
> [    0.000000] 1e80:                                     00000000 c601bbc0 c601c5c0 c0035694
> [    0.000000] 1ea0: c6001c8c c6001c40 c07f0000 c04d7d78 00000000 00000001 c07efaa8 c04d4dd0
> [    0.000000] 1ec0: 00000000 00000000 c04d08c4 c115c5bc 600001d3 c601bbc0 00000020 00000001
> [    0.000000] 1ee0: 00000003 00000013 00000040 c07efaa8 00000000 c04d8284 00000000 c07f0000
> [    0.000000] 1f00: c094e4e8 c07efaa8 c06683ec c08d1efc c7eff101 00000020 c0951fe4 00000001
> [    0.000000] 1f20: 00000000 00000000 c0951fcc c7eff140 c0965000 c04d840c 00000013 00000003
> [    0.000000] 1f40: 00000001 00000000 039457c8 00000040 c601bb80 c0951fcc c0945dac c094e504
> [    0.000000] 1f60: c08b3280 c08a7694 00000000 c601bb80 c094e4e8 c601bb80 c094e508 c08a77a8
> [    0.000000] 1f80: c08aa480 00000000 c0965000 ffffffff c08d28c0 c08b3280 c7eff140 c0965000
> [    0.000000] 1fa0: 00000000 c08aa490 c08aa480 00000000 c0965000 c086f7a4 c08b1e58 c0863aec
> [    0.000000] 1fc0: ffffffff ffffffff c0863678 00000000 00000000 c08b3280 c0965214 c08d296c
> [    0.000000] 1fe0: c08b327c c08d7a0c 80004059 411fc083 00000000 8000807c 00000000 00000000
> [    0.000000] [<c03f2c88>] (regmap_read) from [<c0035694>] (clk_memmap_readl+0x34/0x54)
> [    0.000000] [<c0035694>] (clk_memmap_readl) from [<c04d7d78>] (ti_clk_divider_recalc_rate+0x20/0xf8)
> [    0.000000] [<c04d7d78>] (ti_clk_divider_recalc_rate) from [<c04d4dd0>] (clk_register+0x360/0x6f8)
> [    0.000000] [<c04d4dd0>] (clk_register) from [<c04d8284>] (_register_divider.constprop.5+0xb8/0x120)
> [    0.000000] [<c04d8284>] (_register_divider.constprop.5) from [<c04d840c>] (ti_clk_register_divider+0x80/0xa4)
> [    0.000000] [<c04d840c>] (ti_clk_register_divider) from [<c08a7694>] (ti_clk_register_clk+0x88/0x17c)
> [    0.000000] [<c08a7694>] (ti_clk_register_clk) from [<c08a77a8>] (ti_clk_register_legacy_clks+0x20/0x158)
> [    0.000000] [<c08a77a8>] (ti_clk_register_legacy_clks) from [<c08aa490>] (omap3430_clk_legacy_init+0x10/0x58)
> [    0.000000] [<c08aa490>] (omap3430_clk_legacy_init) from [<c086f7a4>] (omap3_sync32k_timer_init+0x8/0x58)
> [    0.000000] [<c086f7a4>] (omap3_sync32k_timer_init) from [<c0863aec>] (start_kernel+0x238/0x3e8)
> [    0.000000] [<c0863aec>] (start_kernel) from [<8000807c>] (0x8000807c)
> [    0.000000] Code: e92d4070 e1a04000 e1a05001 e1a00001 (e594117c) 
> [    0.000000] ---[ end trace cb88537fdc8fa200 ]---
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html