Subject: [PATCH] ARM: dts: sun7i: Add Goodix GT911 nodes for Wexler TAB7200

From: [email-masked] (Maxime Ripard)
Date: Tue, 31 Mar 2015 07:43:38 -0700

Hi,

On Tue, Mar 31, 2015 at 11:18:17AM +0300, Aleksei Mamlin wrote:
> This patch adds nodes for the Goodix GT911 touchscreen controller found
> on the Wexler TAB7200 tablet. Controller uses one of following I2C
> addresses: 0x5d or 0x14, so just add two nodes.

In which case are these different addresses encountered? Different
revisions of the same board?

> Signed-off-by: Aleksei Mamlin <[email-masked]>
> ---
> DT support for the Goodix GT911 touchscreen controller has been queued up
> by Dmitry Torokhov for merging into 4.1:
> https://git.kernel.org/cgit/linux/kernel/git/dtor/input.git/commit/?h=next&id=771d8f1b178e7e09fcc641fccd48852958dbc329
> 
> IRQ flags are set by the touchscreen controller driver, so use IRQ_TYPE_NONE.
> 
>  arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> index 2ad3b09..34e2bce 100644
> --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> @@ -101,6 +101,20 @@
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&i2c2_pins_a>;
>  	status = "okay";
> +
> +	gt911 at 5d {

The node name should be the class of the device. touchscreen in this
case.

> +		compatible = "goodix,gt911";
> +		reg = <0x5d>;
> +		interrupt-parent = <&pio>;
> +		interrupts = <21 IRQ_TYPE_NONE>; /* EINT21 (PH21) */

Unfortunately, IRQ_TYPE_NONE is not a valid value for the GIC
bindings.

You're also not adding a pinctrl group for that pin?

> +	};
> +
> +	gt911 at 14 {
> +		compatible = "goodix,gt911";
> +		reg = <0x14>;
> +		interrupt-parent = <&pio>;
> +		interrupts = <21 IRQ_TYPE_NONE>; /* EINT21 (PH21) */
> +	};

And nodes should be ordered by addresses ascending order.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150331/a6c2adac/attachment.sig>