Subject: [PATCH RESEND v6 1/6] mfd: axp20x: add AXP22x PMIC support

From: [email-masked] (Lee Jones)
Date: Fri, 10 Apr 2015 10:25:39 +0100

On Fri, 10 Apr 2015, Chen-Yu Tsai wrote:

> From: Boris BREZILLON <[email-masked]>
> 
> Add support for the AXP22x PMIC devices to the existing AXP20x driver.
> This includes the AXP221 and AXP223, which are identical except for
> the external data bus. Only AXP221 is added for now. AXP223 will be
> added after it's Reduced Serial Bus (RSB) interface is supported.
> 
> AXP22x defines a new set of registers, power supplies and regulators,
> but most of the API is similar to the AXP20x ones.
> 
> A new irq chip definition is used, even though the available interrupts
> on AXP22x is a subset of those on AXP20x. This is done so the interrupt
> numbers match those on the datasheet.
> 
> This patch only enables the interrupts, system power-off function, and PEK
> sub-device. The regulator driver must first support different variants
> before we enable it from the mfd driver.
> 
> Signed-off-by: Boris BREZILLON <[email-masked]>
> [wens at csie.org: fix interrupts and move regulators to separate patch]
> Signed-off-by: Chen-Yu Tsai <[email-masked]>
> Acked-by: Lee Jones <[email-masked]>
> ---
> 
> Hi Lee,
> 
> I've asked Mark about merging the regulator patches through the mfd tree
> (in the 4th patch). If he agrees, could you take the whole series?

These sorts of messages are best left in PATCH 0/X rather than hidden
in a random patch.  But yes, I'll take these patches though the MFD
tree.  It's too late to take, test and send out pull-requests for v4.1
now, but I will take them in once the merge-window closes.

> ---
>  drivers/mfd/axp20x.c       | 98 ++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/axp20x.h | 86 ++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 184 insertions(+)
> 
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index d18029be6a78..cfbb7d7aead6 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -32,6 +32,7 @@
>  static const char * const axp20x_model_names[] = {
>  	"AXP202",
>  	"AXP209",
> +	"AXP221",
>  	"AXP288",
>  };
>  
> @@ -54,6 +55,25 @@ static const struct regmap_access_table axp20x_volatile_table = {
>  	.n_yes_ranges	= ARRAY_SIZE(axp20x_volatile_ranges),
>  };
>  
> +static const struct regmap_range axp22x_writeable_ranges[] = {
> +	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
> +	regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1),
> +};
> +
> +static const struct regmap_range axp22x_volatile_ranges[] = {
> +	regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
> +};
> +
> +static const struct regmap_access_table axp22x_writeable_table = {
> +	.yes_ranges	= axp22x_writeable_ranges,
> +	.n_yes_ranges	= ARRAY_SIZE(axp22x_writeable_ranges),
> +};
> +
> +static const struct regmap_access_table axp22x_volatile_table = {
> +	.yes_ranges	= axp22x_volatile_ranges,
> +	.n_yes_ranges	= ARRAY_SIZE(axp22x_volatile_ranges),
> +};
> +
>  static const struct regmap_range axp288_writeable_ranges[] = {
>  	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE),
>  	regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5),
> @@ -87,6 +107,20 @@ static struct resource axp20x_pek_resources[] = {
>  	},
>  };
>  
> +static struct resource axp22x_pek_resources[] = {
> +	{
> +		.name   = "PEK_DBR",
> +		.start  = AXP22X_IRQ_PEK_RIS_EDGE,
> +		.end    = AXP22X_IRQ_PEK_RIS_EDGE,
> +		.flags  = IORESOURCE_IRQ,
> +	}, {
> +		.name   = "PEK_DBF",
> +		.start  = AXP22X_IRQ_PEK_FAL_EDGE,
> +		.end    = AXP22X_IRQ_PEK_FAL_EDGE,
> +		.flags  = IORESOURCE_IRQ,
> +	},
> +};
> +
>  static struct resource axp288_fuel_gauge_resources[] = {
>  	{
>  		.start = AXP288_IRQ_QWBTU,
> @@ -129,6 +163,15 @@ static const struct regmap_config axp20x_regmap_config = {
>  	.cache_type	= REGCACHE_RBTREE,
>  };
>  
> +static const struct regmap_config axp22x_regmap_config = {
> +	.reg_bits	= 8,
> +	.val_bits	= 8,
> +	.wr_table	= &axp22x_writeable_table,
> +	.volatile_table	= &axp22x_volatile_table,
> +	.max_register	= AXP22X_BATLOW_THRES1,
> +	.cache_type	= REGCACHE_RBTREE,
> +};
> +
>  static const struct regmap_config axp288_regmap_config = {
>  	.reg_bits	= 8,
>  	.val_bits	= 8,
> @@ -181,6 +224,34 @@ static const struct regmap_irq axp20x_regmap_irqs[] = {
>  	INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT,		4, 0),
>  };
>  
> +static const struct regmap_irq axp22x_regmap_irqs[] = {
> +	INIT_REGMAP_IRQ(AXP22X, ACIN_OVER_V,		0, 7),
> +	INIT_REGMAP_IRQ(AXP22X, ACIN_PLUGIN,		0, 6),
> +	INIT_REGMAP_IRQ(AXP22X, ACIN_REMOVAL,	        0, 5),
> +	INIT_REGMAP_IRQ(AXP22X, VBUS_OVER_V,		0, 4),
> +	INIT_REGMAP_IRQ(AXP22X, VBUS_PLUGIN,		0, 3),
> +	INIT_REGMAP_IRQ(AXP22X, VBUS_REMOVAL,	        0, 2),
> +	INIT_REGMAP_IRQ(AXP22X, VBUS_V_LOW,		0, 1),
> +	INIT_REGMAP_IRQ(AXP22X, BATT_PLUGIN,		1, 7),
> +	INIT_REGMAP_IRQ(AXP22X, BATT_REMOVAL,	        1, 6),
> +	INIT_REGMAP_IRQ(AXP22X, BATT_ENT_ACT_MODE,	1, 5),
> +	INIT_REGMAP_IRQ(AXP22X, BATT_EXIT_ACT_MODE,	1, 4),
> +	INIT_REGMAP_IRQ(AXP22X, CHARG,		        1, 3),
> +	INIT_REGMAP_IRQ(AXP22X, CHARG_DONE,		1, 2),
> +	INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_HIGH,	        1, 1),
> +	INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_LOW,	        1, 0),
> +	INIT_REGMAP_IRQ(AXP22X, DIE_TEMP_HIGH,	        2, 7),
> +	INIT_REGMAP_IRQ(AXP22X, PEK_SHORT,		2, 1),
> +	INIT_REGMAP_IRQ(AXP22X, PEK_LONG,		2, 0),
> +	INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL1,	        3, 1),
> +	INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL2,	        3, 0),
> +	INIT_REGMAP_IRQ(AXP22X, TIMER,		        4, 7),
> +	INIT_REGMAP_IRQ(AXP22X, PEK_RIS_EDGE,	        4, 6),
> +	INIT_REGMAP_IRQ(AXP22X, PEK_FAL_EDGE,	        4, 5),
> +	INIT_REGMAP_IRQ(AXP22X, GPIO1_INPUT,		4, 1),
> +	INIT_REGMAP_IRQ(AXP22X, GPIO0_INPUT,		4, 0),
> +};
> +
>  /* some IRQs are compatible with axp20x models */
>  static const struct regmap_irq axp288_regmap_irqs[] = {
>  	INIT_REGMAP_IRQ(AXP288, VBUS_FALL,              0, 2),
> @@ -224,6 +295,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = {
>  static const struct of_device_id axp20x_of_match[] = {
>  	{ .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
>  	{ .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
> +	{ .compatible = "x-powers,axp221", .data = (void *) AXP221_ID },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, axp20x_of_match);
> @@ -258,6 +330,18 @@ static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
>  
>  };
>  
> +static const struct regmap_irq_chip axp22x_regmap_irq_chip = {
> +	.name			= "axp22x_irq_chip",
> +	.status_base		= AXP20X_IRQ1_STATE,
> +	.ack_base		= AXP20X_IRQ1_STATE,
> +	.mask_base		= AXP20X_IRQ1_EN,
> +	.mask_invert		= true,
> +	.init_ack_masked	= true,
> +	.irqs			= axp22x_regmap_irqs,
> +	.num_irqs		= ARRAY_SIZE(axp22x_regmap_irqs),
> +	.num_regs		= 5,
> +};
> +
>  static const struct regmap_irq_chip axp288_regmap_irq_chip = {
>  	.name			= "axp288_irq_chip",
>  	.status_base		= AXP20X_IRQ1_STATE,
> @@ -281,6 +365,14 @@ static struct mfd_cell axp20x_cells[] = {
>  	},
>  };
>  
> +static struct mfd_cell axp22x_cells[] = {
> +	{
> +		.name			= "axp20x-pek",
> +		.num_resources		= ARRAY_SIZE(axp22x_pek_resources),
> +		.resources		= axp22x_pek_resources,
> +	},
> +};
> +
>  static struct resource axp288_adc_resources[] = {
>  	{
>  		.name  = "GPADC",
> @@ -426,6 +518,12 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev)
>  		axp20x->regmap_cfg = &axp20x_regmap_config;
>  		axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
>  		break;
> +	case AXP221_ID:
> +		axp20x->nr_cells = ARRAY_SIZE(axp22x_cells);
> +		axp20x->cells = axp22x_cells;
> +		axp20x->regmap_cfg = &axp22x_regmap_config;
> +		axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip;
> +		break;
>  	case AXP288_ID:
>  		axp20x->cells = axp288_cells;
>  		axp20x->nr_cells = ARRAY_SIZE(axp288_cells);
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index dfabd6db7ddf..95568eb798c3 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -14,6 +14,7 @@
>  enum {
>  	AXP202_ID = 0,
>  	AXP209_ID,
> +	AXP221_ID,
>  	AXP288_ID,
>  	NR_AXP20X_VARIANTS,
>  };
> @@ -45,6 +46,28 @@ enum {
>  #define AXP20X_V_LTF_DISCHRG		0x3c
>  #define AXP20X_V_HTF_DISCHRG		0x3d
>  
> +#define AXP22X_PWR_OUT_CTRL1		0x10
> +#define AXP22X_PWR_OUT_CTRL2		0x12
> +#define AXP22X_PWR_OUT_CTRL3		0x13
> +#define AXP22X_DLDO1_V_OUT		0x15
> +#define AXP22X_DLDO2_V_OUT		0x16
> +#define AXP22X_DLDO3_V_OUT		0x17
> +#define AXP22X_DLDO4_V_OUT		0x18
> +#define AXP22X_ELDO1_V_OUT		0x19
> +#define AXP22X_ELDO2_V_OUT		0x1a
> +#define AXP22X_ELDO3_V_OUT		0x1b
> +#define AXP22X_DC5LDO_V_OUT		0x1c
> +#define AXP22X_DCDC1_V_OUT		0x21
> +#define AXP22X_DCDC2_V_OUT		0x22
> +#define AXP22X_DCDC3_V_OUT		0x23
> +#define AXP22X_DCDC4_V_OUT		0x24
> +#define AXP22X_DCDC5_V_OUT		0x25
> +#define AXP22X_DCDC23_V_RAMP_CTRL	0x27
> +#define AXP22X_ALDO1_V_OUT		0x28
> +#define AXP22X_ALDO2_V_OUT		0x29
> +#define AXP22X_ALDO3_V_OUT		0x2a
> +#define AXP22X_CHRG_CTRL3		0x35
> +
>  /* Interrupt */
>  #define AXP20X_IRQ1_EN			0x40
>  #define AXP20X_IRQ2_EN			0x41
> @@ -100,6 +123,9 @@ enum {
>  #define AXP20X_VBUS_MON			0x8b
>  #define AXP20X_OVER_TMP			0x8f
>  
> +#define AXP22X_PWREN_CTRL1		0x8c
> +#define AXP22X_PWREN_CTRL2		0x8d
> +
>  /* GPIO */
>  #define AXP20X_GPIO0_CTRL		0x90
>  #define AXP20X_LDO5_V_OUT		0x91
> @@ -108,6 +134,11 @@ enum {
>  #define AXP20X_GPIO20_SS		0x94
>  #define AXP20X_GPIO3_CTRL		0x95
>  
> +#define AXP22X_LDO_IO0_V_OUT		0x91
> +#define AXP22X_LDO_IO1_V_OUT		0x93
> +#define AXP22X_GPIO_STATE		0x94
> +#define AXP22X_GPIO_PULL_DOWN		0x95
> +
>  /* Battery */
>  #define AXP20X_CHRG_CC_31_24		0xb0
>  #define AXP20X_CHRG_CC_23_16		0xb1
> @@ -120,6 +151,9 @@ enum {
>  #define AXP20X_CC_CTRL			0xb8
>  #define AXP20X_FG_RES			0xb9
>  
> +/* AXP22X specific registers */
> +#define AXP22X_BATLOW_THRES1		0xe6
> +
>  /* AXP288 specific registers */
>  #define AXP288_PMIC_ADC_H               0x56
>  #define AXP288_PMIC_ADC_L               0x57
> @@ -158,6 +192,30 @@ enum {
>  	AXP20X_REG_ID_MAX,
>  };
>  
> +enum {
> +	AXP22X_DCDC1 = 0,
> +	AXP22X_DCDC2,
> +	AXP22X_DCDC3,
> +	AXP22X_DCDC4,
> +	AXP22X_DCDC5,
> +	AXP22X_DC1SW,
> +	AXP22X_DC5LDO,
> +	AXP22X_ALDO1,
> +	AXP22X_ALDO2,
> +	AXP22X_ALDO3,
> +	AXP22X_ELDO1,
> +	AXP22X_ELDO2,
> +	AXP22X_ELDO3,
> +	AXP22X_DLDO1,
> +	AXP22X_DLDO2,
> +	AXP22X_DLDO3,
> +	AXP22X_DLDO4,
> +	AXP22X_RTC_LDO,
> +	AXP22X_LDO_IO0,
> +	AXP22X_LDO_IO1,
> +	AXP22X_REG_ID_MAX,
> +};
> +
>  /* IRQs */
>  enum {
>  	AXP20X_IRQ_ACIN_OVER_V = 1,
> @@ -199,6 +257,34 @@ enum {
>  	AXP20X_IRQ_GPIO0_INPUT,
>  };
>  
> +enum axp22x_irqs {
> +	AXP22X_IRQ_ACIN_OVER_V = 1,
> +	AXP22X_IRQ_ACIN_PLUGIN,
> +	AXP22X_IRQ_ACIN_REMOVAL,
> +	AXP22X_IRQ_VBUS_OVER_V,
> +	AXP22X_IRQ_VBUS_PLUGIN,
> +	AXP22X_IRQ_VBUS_REMOVAL,
> +	AXP22X_IRQ_VBUS_V_LOW,
> +	AXP22X_IRQ_BATT_PLUGIN,
> +	AXP22X_IRQ_BATT_REMOVAL,
> +	AXP22X_IRQ_BATT_ENT_ACT_MODE,
> +	AXP22X_IRQ_BATT_EXIT_ACT_MODE,
> +	AXP22X_IRQ_CHARG,
> +	AXP22X_IRQ_CHARG_DONE,
> +	AXP22X_IRQ_BATT_TEMP_HIGH,
> +	AXP22X_IRQ_BATT_TEMP_LOW,
> +	AXP22X_IRQ_DIE_TEMP_HIGH,
> +	AXP22X_IRQ_PEK_SHORT,
> +	AXP22X_IRQ_PEK_LONG,
> +	AXP22X_IRQ_LOW_PWR_LVL1,
> +	AXP22X_IRQ_LOW_PWR_LVL2,
> +	AXP22X_IRQ_TIMER,
> +	AXP22X_IRQ_PEK_RIS_EDGE,
> +	AXP22X_IRQ_PEK_FAL_EDGE,
> +	AXP22X_IRQ_GPIO1_INPUT,
> +	AXP22X_IRQ_GPIO0_INPUT,
> +};
> +
>  enum axp288_irqs {
>  	AXP288_IRQ_VBUS_FALL     = 2,
>  	AXP288_IRQ_VBUS_RISE,

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog