From: andrew@lunn•ch (Andrew Lunn)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 2/2] ARM: mvebu: dts: Add dts file for DLink DNS-327L
Date: Sat, 11 Apr 2015 23:40:05 +0200 [thread overview]
Message-ID: <20150411214005.GJ5244@lunn.ch> (raw)
In-Reply-To: <1428784160-19431-3-git-send-email-andrew@ncrmnt.org>
On Sat, Apr 11, 2015 at 11:29:20PM +0300, Andrew Andrianov wrote:
> Signed-off-by: Andrew Andrianov <andrew@ncrmnt•org>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 309 ++++++++++++++++++++++++
> 2 files changed, 310 insertions(+)
> create mode 100644 arch/arm/boot/dts/armada-370-dlink-dns327l.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index a1c776b..8535e4e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -612,6 +612,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
> zynq-zybo.dtb
> dtb-$(CONFIG_MACH_ARMADA_370) += \
> armada-370-db.dtb \
> + armada-370-dlink-dns327l.dtb \
> armada-370-mirabox.dtb \
> armada-370-netgear-rn102.dtb \
> armada-370-netgear-rn104.dtb \
> diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
> new file mode 100644
> index 0000000..12bc072
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
> @@ -0,0 +1,309 @@
> +/*
> + * Device Tree file for DLINK DNS-327L
> + *
> + * Copyright (C) 2014, Andrew Andrianov <andrew@ncrmnt•org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
Hi Andrew
There has been a move to license all the 370 and XP DTS files under
dual GPL and X11. Are you willing to add X11?
> +
> +/* Remaining mysteries:
> + *
> + * There's still something unknown on i2c address 0x13
> + * CONFIG_ARM_MVEBU_V7_CPUIDLE=y causes hard freezes every 1-8 hours
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include "armada-370.dtsi"
> +
> +/ {
> + model = "DLINK DNS-327L";
> + compatible = "dlink,dns327l",
> + "marvell,armada370",
> + "marvell,armada-370-xp";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200 earlyprintk";
It would be nice to have
stdout-path = &uart0;
here. That will help with boot loaders, using this DT file, and it a
step towards removing the console=ttyS0,115200.
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x20000000>; /* 512 MiB */
> + };
> +
> + soc {
> + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
> + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
> +
> + pcie-controller {
> + status = "okay";
> +
> + /* Connected to Marvell SATA controller */
> + pcie at 1,0 {
> + /* Port 0, Lane 0 */
> + status = "okay";
> + };
> +
> + /* Connected to NEC USB 3.0 controller */
> + pcie at 2,0 {
> + /* Port 1, Lane 0 */
> + status = "okay";
> + };
> + };
> +
> + internal-regs {
> + serial at 12000 {
> + status = "okay";
> + };
> +
> + serial at 12100 {
> + status = "okay";
> + };
Are both serial ports usable?
Could you document the pinout for the console?
Thanks
Andrew
next prev parent reply other threads:[~2015-04-11 21:40 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-11 20:29 [PATCH 0/2] ARM: mvebu: Add DLINK-DNS327L support Andrew Andrianov
2015-04-11 20:29 ` [PATCH 1/2] pinctrl: mvebu: Fix mapping of pin 63 (gpo -> gpio) Andrew Andrianov
2015-04-27 13:24 ` Linus Walleij
2015-05-29 9:10 ` Thomas Petazzoni
2015-05-29 9:55 ` Andrew
2015-05-29 10:06 ` Thomas Petazzoni
2015-04-11 20:29 ` [PATCH 2/2] ARM: mvebu: dts: Add dts file for DLink DNS-327L Andrew Andrianov
2015-04-11 21:40 ` Andrew Lunn [this message]
2015-04-11 21:45 ` Andrew Lunn
2015-04-12 11:25 ` [PATCH v2 0/2] ARM: mvebu: Add support for DLINK DNS-327L Andrew Andrianov
2015-04-12 11:25 ` [PATCH v2 1/2] pinctrl: mvebu: Fix mapping of pin 63 (gpo -> gpio) Andrew Andrianov
2015-04-12 11:25 ` [PATCH v2 2/2] ARM: mvebu: dts: Add dts file for DLink DNS-327L Andrew Andrianov
2015-04-12 11:38 ` Sebastian Hesselbarth
2015-04-11 22:33 ` [PATCH " Andrew
2015-04-12 11:20 ` Sebastian Hesselbarth
2015-04-11 21:28 ` [PATCH 0/2] ARM: mvebu: Add DLINK-DNS327L support Andrew Lunn
2015-04-13 14:39 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150411214005.GJ5244@lunn.ch \
--to=andrew@lunn$(echo .)ch \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox