Subject: [PATCH v2 2/3] ARM: dove: Add clock-names to CuBox Si5351 clk generator

From: [email-masked] (Michael Turquette)
Date: Fri, 08 May 2015 12:00:50 -0700

Quoting Gregory CLEMENT (2015-05-06 06:14:22)
> Hi Sebastian,
> 
> On 04/05/2015 23:04, Sebastian Hesselbarth wrote:
> > Si5351 clock generator on CuBox uses XTAL as clock reference, name the
> > clock phandle accordingly.
> 
> as soon as the binding will be accepted (in patch 1), I will apply it
> on mvebu/fixes.

It is on the clk git mirror now. Should be picked up in -next soon.

Regards,
Mike

> 
> Thanks,
> 
> Gregory
> 
> 
> > 
> > Signed-off-by: Sebastian Hesselbarth <[email-masked]>
> > ---
> > Cc: Mike Turquette <[email-masked]>
> > Cc: Stephen Boyd <[email-masked]>
> > Cc: Jean-Francois Moine <[email-masked]>
> > Cc: Michael Welling <[email-masked]>
> > Cc: Russell King <[email-masked]>
> > Cc: Jason Cooper <[email-masked]>
> > Cc: Andrew Lunn <[email-masked]>
> > Cc: Gregory Clement <[email-masked]>
> > Cc: linux-clk at vger.kernel.org
> > Cc: linux-arm-kernel at lists.infradead.org
> > Cc: linux-kernel at vger.kernel.org
> > ---
> >  arch/arm/boot/dts/dove-cubox.dts | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
> > index aae7efc09b0b..e6fa251e17b9 100644
> > --- a/arch/arm/boot/dts/dove-cubox.dts
> > +++ b/arch/arm/boot/dts/dove-cubox.dts
> > @@ -87,6 +87,7 @@
> >  
> >               /* connect xtal input to 25MHz reference */
> >               clocks = <&ref25>;
> > +             clock-names = "xtal";
> >  
> >               /* connect xtal input as source of pll0 and pll1 */
> >               silabs,pll-source = <0 0>, <1 0>;
> > 
> 
> 
> -- 
> Gregory Clement, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com