Subject: [PATCH 2/6] clk: sunxi: Add H3 clocks support

From: [email-masked] (Maxime Ripard)
Date: Fri, 15 May 2015 14:49:34 +0200

On Thu, May 14, 2015 at 01:14:25PM +0800, Chen-Yu Tsai wrote:
> On Tue, May 12, 2015 at 10:44 PM, Maxime Ripard
> <[email-masked]> wrote:
> > Hi,
> >
> > On Sun, May 10, 2015 at 12:54:50PM +0200, Jens Kuske wrote:
> >> On 09/05/15 13:27, Maxime Ripard wrote:
> >> > On Wed, May 06, 2015 at 11:31:29AM +0200, Jens Kuske wrote:
> >> >> The H3 clock control unit is similar to the those of other sun8i family
> >> >> members like the A23.
> >> >>
> >> >> The AHB1 gates got split up into AHB1 and AHB2, with AHB2 clock source
> >> >> being muxable between AHB1 and PLL6/2, but still sharing gate registers.
> >> >> The documentation isn't totally clear about which devices belong to
> >> >> AHB2 now, especially USB EHIC/OHIC, so it is mostly based on Allwinner
> >> >> kernel source code.
> >> >>
> >> >> Signed-off-by: Jens Kuske <[email-masked]>
> >> >> ---
> >> >>  Documentation/devicetree/bindings/clock/sunxi.txt |  7 ++++
> >> >>  drivers/clk/sunxi/clk-sunxi.c                     | 46 ++++++++++++++++++++++-
> >> >>  2 files changed, 52 insertions(+), 1 deletion(-)
> >> >>
> >> >> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> >> >> index 4fa11af..4eeb893 100644
> >> >> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> >> >> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> >> >> @@ -14,6 +14,8 @@ Required properties:
> >> >>    "allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
> >> >>    "allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
> >> >>    "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
> >> >> +  "allwinner,sun8i-h3-pll6-clk" - for the PLL6 clock on H3
> >> >> +  "allwinner,sun8i-h3-pll8-clk" - for the PLL8 clock on H3
> >> >>    "allwinner,sun9i-a80-gt-clk" - for the GT bus clock on A80
> >> >>    "allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
> >> >>    "allwinner,sun4i-a10-axi-clk" - for the AXI clock
> >> >> @@ -28,8 +30,11 @@ Required properties:
> >> >>    "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
> >> >>    "allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
> >> >>    "allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
> >> >> +  "allwinner,sun8i-h3-ahb2-clk" - for the AHB2 clock on H3
> >> >>    "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
> >> >>    "allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
> >> >> +  "allwinner,sun8i-h3-ahb1-gates-clk" - for the AHB1 gates on H3
> >> >> +  "allwinner,sun8i-h3-ahb2-gates-clk" - for the AHB2 gates on H3
> >> >>    "allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
> >> >>    "allwinner,sun9i-a80-ahb1-gates-clk" - for the AHB1 gates on A80
> >> >>    "allwinner,sun9i-a80-ahb2-gates-clk" - for the AHB2 gates on A80
> >> >> @@ -52,8 +57,10 @@ Required properties:
> >> >>    "allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
> >> >>    "allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
> >> >>    "allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23
> >> >> +  "allwinner,sun8i-h3-apb1-gates-clk" - for the APB1 gates on H3
> >> >>    "allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80
> >> >>    "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
> >> >> +  "allwinner,sun8i-h3-apb2-gates-clk" - for the APB2 gates on H3
> >> >>    "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
> >> >>    "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
> >> >>    "allwinner,sun4i-a10-mmc-clk" - for the MMC clock
> >> >> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
> >> >> index 7e1e2bd..152a1f7 100644
> >> >> --- a/drivers/clk/sunxi/clk-sunxi.c
> >> >> +++ b/drivers/clk/sunxi/clk-sunxi.c
> >> >> @@ -727,6 +727,12 @@ static const struct factors_data sun5i_a13_ahb_data __initconst = {
> >> >>    .getter = sun5i_a13_get_ahb_factors,
> >> >>  };
> >> >>
> >> >> +static const struct factors_data sun8i_h3_pll8_data __initconst = {
> >> >> +  .enable = 31,
> >> >> +  .table = &sun6i_a31_pll6_config,
> >> >> +  .getter = sun6i_a31_get_pll6_factors,
> >> >> +};
> >> >
> >> > This looks like it's just another instance of the A31 pll6.
> >> >
> >> > In such a case, we don't need to declare a new driver, just reuse the
> >> > same compatible.
> >>
> >> If I reuse pll6 for pll8 I get errors because of the .name = "pll6x2"
> >> field, already existing clock or something like that.
> >
> > Damn. You're obviously right...
> 
> I think I have a solution for this.
> 
> The current divs clock setup just passes the factors_data directly to
> sunxi_factors_register(). What if it did a copy, read the _correct_
> name from the DT (since it knows the index) and put it in the copy.
> 
> How does that sound?

That sounds great, but what name would you take from the DT? The first
of clock-output-names? the last one? a random one?

> 
> > Could you add a TODO comment on top then? just so that we know that we
> > need to merge this clock with pll6?
> >
> >> (And pll8 doesn't even have a x2 version)
> >
> > Judging by the H3 datasheet, it does.
> >
> >> >>  static const struct factors_data sun4i_apb1_data __initconst = {
> >> >>    .mux = 24,
> >> >>    .muxmask = BIT(1) | BIT(0),
> >> >> @@ -777,6 +783,10 @@ static const struct mux_data sun6i_a31_ahb1_mux_data __initconst = {
> >> >>    .shift = 12,
> >> >>  };
> >> >>
> >> >> +static const struct mux_data sun8i_h3_ahb2_mux_data __initconst = {
> >> >> +  .shift = 0,
> >> >> +};
> >> >> +
> >> >>  static void __init sunxi_mux_clk_setup(struct device_node *node,
> >> >>                                   struct mux_data *data)
> >> >>  {
> >> >> @@ -892,7 +902,7 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
> >> >>   * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks
> >> >>   */
> >> >>
> >> >> -#define SUNXI_GATES_MAX_SIZE      64
> >> >> +#define SUNXI_GATES_MAX_SIZE      160
> >> >>
> >> >>  struct gates_data {
> >> >>    DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
> >> >> @@ -926,6 +936,10 @@ static const struct gates_data sun8i_a23_ahb1_gates_data __initconst = {
> >> >>    .mask = {0x25386742, 0x2505111},
> >> >>  };
> >> >>
> >> >> +static const struct gates_data sun8i_h3_ahb1_gates_data __initconst = {
> >> >> +  .mask = {0x1fbc6760, 0x00701b39, 0x00000000, 0x00000000, 0x00000081},
> >> >> +};
> >> >> +
> >> >
> >> > Judging from the user manual, there's a few gates in those 0
> >> > registers, is this normal that you don't support them?
> >>
> >> They are holes for apb1 and apb2. Which is actually pretty ugly.
> >
> > Ah, right.
> >
> > So I guess it's completely related to the discussion below.
> 
> If the holes are really big, I guess you could split ahb and apb?

It's actually already split. The holes in the ahb1 registers are for
the apb clocks.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150515/f6fae41b/attachment.sig>