Subject: [PATCH v1] ARM: pci: add call to pcie_bus_configure_settings()

From: [email-masked] (Bjorn Helgaas)
Date: Sat, 16 May 2015 09:02:30 -0500

On Wed, May 28, 2014 at 01:14:53PM -0400, Murali Karicheri wrote:
> Call pcie_bus_configure_settings on ARM, like for other platforms.
> pcie_bus_configure_settings makes sure the MPS across the bus is
> uniform and provides the ability to tune the MRSS and MPS to higher
> performance values. This is particularly important for embedded where
> there is no firmware to program these PCI-E settings for the OS.
> 
> Signed-off-by: Murali Karicheri <[email-masked]>
> 
> CC: Russell King <[email-masked]>
> CC: Bjorn Helgaas <[email-masked]>
> CC: Arnd Bergmann <[email-masked]>
> CC: Jason Gunthorpe <[email-masked]>
> CC: Santosh Shilimkar <[email-masked]>
> ---
>  - Fixed comments against initial version
>  arch/arm/kernel/bios32.c |   12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
> index 16d43cd..17a26c1 100644
> --- a/arch/arm/kernel/bios32.c
> +++ b/arch/arm/kernel/bios32.c
> @@ -545,6 +545,18 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw)
>  		 */
>  		pci_bus_add_devices(bus);
>  	}
> +
> +	list_for_each_entry(sys, &head, node) {
> +		struct pci_bus *bus = sys->bus;
> +
> +		/* Configure PCI Express settings */
> +		if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
> +			struct pci_bus *child;
> +
> +			list_for_each_entry(child, &bus->children, node)
> +				pcie_bus_configure_settings(child);

This patch (8b5742ad156d ("ARM/PCI: Call pcie_bus_configure_settings() to
set MPS")) has been upstream since v3.16-rc1, but I think we goofed.

The MPS configuration should be done *before* pci_bus_add_devices().  After
pci_bus_add_devices(), drivers may be bound to devices, and the PCI core
shouldn't touch device configuration while a driver owns the device.

Looking at the code, it seems like it would have been simpler to do this in
the existing loop:

  list_for_each_entry(sys, &head, node) {
    struct pci_bus *bus = sys->bus;

    if (bus && !pci_has_flag(PCI_PROBE_ONLY)) {
      pci_bus_size_bridges(bus);
      pci_bus_assign_resources(bus);
      list_for_each_entry(child, &bus->children, node)
        pcie_bus_configure_settings(child);
    }

    pci_bus_add_devices(bus);
  }

so maybe there's some reason I'm not aware of for not doing it that way?

> +		}
> +	}
>  }
>  
>  #ifndef CONFIG_PCI_HOST_ITE8152
> -- 
> 1.7.9.5
>