Subject: [PATCH] ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box

From: [email-masked] (Maxime Ripard)
Date: Tue, 2 Jun 2015 17:58:16 +0200

On Mon, Jun 01, 2015 at 05:02:59PM +0200, Hans de Goede wrote:
> The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been using
> the same dts for both models. Unfortunately this does not work for the otg
> controller, on the M9 this is routed to a micro-usb connector on the outside,
> while as on the A1000G-quad it is connected to an usb to sata bridge
> (which is not populated on the M9 pcb).
> 
> This commit adds a new dts for the Mele-A1000G-quad to allow using
> different otg controller settings on the 2 boards.
> 
> Signed-off-by: Hans de Goede <[email-masked]>
> ---
>  arch/arm/boot/dts/Makefile                                        | 1 +
>  arch/arm/boot/dts/{sun6i-a31-m9.dts => sun6i-a31-a1000g-quad.dts} | 4 ++--

Didn't we say that we were trying to set the vendor name in the DTs
now, at least for the new ones?

I can fix this and apply it if it's ok for you.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150602/0c6d6879/attachment.sig>