Subject: [PATCH V7 3/3] OPP: Add binding for 'opp-suspend'

From: [email-masked] (Viresh Kumar)
Date: Sat, 13 Jun 2015 14:10:23 +0530

On 04-06-15, 21:50, Viresh Kumar wrote:
> +		opp-suspend = <&suspend_opp>;

> -		opp00 {
> +		suspend-opp: opp00 {

Minor nit, s/suspend-opp/suspend_opp

and here is updated patch

From: Viresh Kumar <[email-masked]>
Date: Wed, 20 May 2015 08:27:49 +0530
Subject: [PATCH V8] OPP: Add binding for 'opp-suspend'

On few platforms, for power efficiency, we want the device to be
configured for a specific OPP while we put the device in suspend state.

Add an optional property in operating-points-v2 bindings for that.

Acked-by: Nishanth Menon <[email-masked]>
Suggested-by: Nishanth Menon <[email-masked]>
Signed-off-by: Viresh Kumar <[email-masked]>
---
 Documentation/devicetree/bindings/power/opp.txt | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/opp.txt b/Documentation/devicetree/bindings/power/opp.txt
index 2938c52dbf84..29f115d26f7d 100644
--- a/Documentation/devicetree/bindings/power/opp.txt
+++ b/Documentation/devicetree/bindings/power/opp.txt
@@ -74,6 +74,8 @@ This describes the OPPs belonging to a device. This node can have following
   Missing property means devices have independent clock/voltage/current lines,
   but they share OPP tables.
 
+- opp-suspend: Phandle of the OPP to set while device is suspended.
+
 
 * OPP Node
 
@@ -145,9 +147,10 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
 
 	cpu0_opp_table: opp_table0 {
 		compatible = "operating-points-v2";
+		opp-suspend = <&suspend_opp>;
 		opp-shared;
 
-		opp00 {
+		suspend_opp: opp00 {
 			opp-hz = <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
@@ -219,13 +222,14 @@ independently.
 
 	cpu_opp_table: opp_table {
 		compatible = "operating-points-v2";
+		opp-suspend = <&suspend_opp>;
 
 		/*
 		 * Missing opp-shared property means CPUs switch DVFS states
 		 * independently.
 		 */
 
-		opp00 {
+		suspend_opp: opp00 {
 			opp-hz = <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
@@ -298,9 +302,10 @@ DVFS state together.
 
 	cluster0_opp: opp_table0 {
 		compatible = "operating-points-v2";
+		opp-suspend = <&suspend_opp0>;
 		opp-shared;
 
-		opp00 {
+		suspend_opp: opp00 {
 			opp-hz = <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
@@ -323,9 +328,10 @@ DVFS state together.
 
 	cluster1_opp: opp_table1 {
 		compatible = "operating-points-v2";
+		opp-suspend = <&suspend_opp1>;
 		opp-shared;
 
-		opp10 {
+		suspend_opp: opp10 {
 			opp-hz = <1300000000>;
 			opp-microvolt = <1045000 1050000 1055000>;
 			opp-microamp = <95000>;