Subject: n900 in 4.2-rc0: repeating oopses

From: [email-masked] (Pali Rohár)
Date: Tue, 30 Jun 2015 11:53:10 +0200

On Tuesday 30 June 2015 11:24:04 Pavel Machek wrote:
> Hi!
> 
> > Just tried booting 4.2-rc0 on n900 (commit
> > 4a10a91756ef381bced7b88cfb9232f660b92d93) and it is broken. Previous
> > -rc0 version worked. This time, there's some output on console, but
> > too fast for me to read.
> > 
> > It seems oopses happen before mounting root. If you have serial
> > console, they should be easy to see.
> 
> I tried again according to pali's instructions, and it is still
> broken the same way. Any other ideas? Does it work for you?
> 
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index 69a40cf..ff6f2bf 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -570,6 +570,7 @@
>  			interrupts = <49>;
>  			dmas = <&sdma 69>;
>  			dma-names = "rx";
> +			status = "disabled";
>  		};
>  
>  		smartreflex_core: smartreflex at 480cb000 {
> 
> 									Pavel
> 

Ok, then it is not problem with omap crypto and HS device...

I will try 4.2 at the end of week.

-- 
Pali Roh?r
pali.rohar at gmail.com