Subject: [PATCH-V5 3/4] mfd: 88pm800: Set default interrupt clear method

From: [email-masked] (Lee Jones)
Date: Tue, 7 Jul 2015 08:29:58 +0100

On Mon, 29 Jun 2015, Vaibhav Hiremath wrote:

> As per the spec, bit 1 (INT_CLEAR_MODE) of reg addr 0xe
> (page 0) controls the method of clearing interrupt
> status of 88pm800 family of devices;
> 
>   0: clear on read
>   1: clear on write
> 
> If pdata is not coming from board file, then set the
> default irq clear method to "irq clear on write"
> 
> Also, as suggested by "Lee Jones" renaming variable field
> to appropriate name.
> 
> Signed-off-by: Zhao Ye <[email-masked]>
> Signed-off-by: Vaibhav Hiremath <[email-masked]>
> ---
>  drivers/mfd/88pm800.c       | 15 ++++++++++-----
>  include/linux/mfd/88pm80x.h | 10 ++++++++--
>  2 files changed, 18 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
> index d495737..66347be 100644
> --- a/drivers/mfd/88pm800.c
> +++ b/drivers/mfd/88pm800.c
> @@ -374,7 +374,7 @@ static int device_irq_init_800(struct pm80x_chip *chip)
>  {
>  	struct regmap *map = chip->regmap;
>  	unsigned long flags = IRQF_ONESHOT;
> -	int data, mask, ret = -EINVAL;
> +	int irq_clr_mode, mask, ret = -EINVAL;
>  
>  	if (!map || !chip->irq) {
>  		dev_err(chip->dev, "incorrect parameters\n");
> @@ -382,15 +382,16 @@ static int device_irq_init_800(struct pm80x_chip *chip)
>  	}
>  
>  	/*
> -	 * irq_mode defines the way of clearing interrupt. it's read-clear by
> -	 * default.
> +	 * irq_clr_on_wr defines the way of clearing interrupt by
> +	 * read/write(0/1).  It's read-clear by default.
>  	 */
>  	mask =
>  	    PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR |
>  	    PM800_WAKEUP2_INT_MASK;
>  
> -	data = PM800_WAKEUP2_INT_CLEAR;
> -	ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data);
> +	irq_clr_mode = chip->irq_clr_method == PM800_IRQ_CLR_ON_WRITE ?
> +		PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR;
> +	ret = regmap_update_bits(map, PM800_WAKEUP2, mask, irq_clr_mode);

What's stopping you just passing PM800_WAKEUP2_INT_WRITE_CLEAR or
PM800_WAKEUP2_INT_READ_CLEAR from pdata?  Then you can use the value
directly without all of this faffing about.

  regmap_update_bits(map, PM800_WAKEUP2, mask, pdata->irq_clr_mode);

>  	if (ret < 0)
>  		goto out;
> @@ -512,6 +513,7 @@ static int device_800_init(struct pm80x_chip *chip,
>  	}
>  
>  	chip->regmap_irq_chip = &pm800_irq_chip;
> +	chip->irq_clr_method = pdata->irq_clr_method;
>  
>  	ret = device_irq_init_800(chip);
>  	if (ret < 0) {
> @@ -564,6 +566,9 @@ static int pm800_probe(struct i2c_client *client,
>  		pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
>  		if (!pdata)
>  			return -ENOMEM;
> +
> +		/* by default, set irq clear method on write */
> +		pdata->irq_clr_method = PM800_IRQ_CLR_ON_WRITE;
>  	}
>  
>  	ret = pm80x_init(client);
> diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
> index 8fcad63..648e01a 100644
> --- a/include/linux/mfd/88pm80x.h
> +++ b/include/linux/mfd/88pm80x.h
> @@ -77,6 +77,8 @@ enum {
>  #define PM800_WAKEUP2			(0x0E)
>  #define PM800_WAKEUP2_INV_INT		BIT(0)
>  #define PM800_WAKEUP2_INT_CLEAR		BIT(1)
> +#define PM800_WAKEUP2_INT_READ_CLEAR	(0 << 1)
> +#define PM800_WAKEUP2_INT_WRITE_CLEAR	(1 << 1)
>  #define PM800_WAKEUP2_INT_MASK		BIT(2)
>  
>  #define PM800_POWER_UP_LOG		(0x10)
> @@ -300,7 +302,11 @@ struct pm80x_chip {
>  	struct regmap_irq_chip_data *irq_data;
>  	int type;
>  	int irq;
> -	int irq_mode;
> +
> +#define PM800_IRQ_CLR_ON_READ	0
> +#define PM800_IRQ_CLR_ON_WRITE	1

Defines in the middle of structs makes for ugly code.

> +	bool irq_clr_method;	/* '1': Clear on write, '0': Clear on read */
>  	unsigned long wu_flag;
>  	spinlock_t lock;
>  };
> @@ -315,7 +321,7 @@ struct pm80x_platform_data {
>  	 */
>  	struct regulator_init_data *regulators[PM800_ID_RG_MAX];
>  	unsigned int num_regulators;
> -	int irq_mode;		/* Clear interrupt by read/write(0/1) */
> +	bool irq_clr_method;		/* Clear interrupt by read/write(0/1) */
>  	int batt_det;		/* enable/disable */
>  	int (*plat_config)(struct pm80x_chip *chip,
>  				struct pm80x_platform_data *pdata);

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog