Subject: [PATCH v11 1/6] PCI: designware: move calculation of bus addresses to DRA7xx

From: [email-masked] (Bjorn Helgaas)
Date: Wed, 21 Oct 2015 17:15:24 -0500

Hi Zhou & Gabriele,

On Fri, Oct 16, 2015 at 06:23:36PM +0800, Zhou Wang wrote:
> From: gabriele paoloni <[email-masked]>
> 
> Commit f4c55c5a3f7f ("PCI: designware: Program ATU with untranslated
> address") added the calculation of PCI BUS addresses in designware,
> storing them in new fields added in "struct pcie_port". This
> calculation is done for every designware user even if is only
> applicable to DRA7xx.
> This patch moves the calculation of the bus addresses to the DRA7xx
> driver and is needed to allow the rework of designware to use
> the new DT parsing API.
> 
> Signed-off-by: Gabriele Paoloni <[email-masked]>
> Signed-off-by: Zhou Wang <[email-masked]>
> Acked-by: Pratyush Anand <[email-masked]>
> ---
>  drivers/pci/host/pci-dra7xx.c      | 13 +++++++++++++
>  drivers/pci/host/pcie-designware.c | 15 ++++-----------
>  2 files changed, 17 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
> index 199e29a..ebdffa0 100644
> --- a/drivers/pci/host/pci-dra7xx.c
> +++ b/drivers/pci/host/pci-dra7xx.c
> @@ -62,6 +62,7 @@
>  
>  #define	PCIECTRL_DRA7XX_CONF_PHY_CS			0x010C
>  #define	LINK_UP						BIT(16)
> +#define	CPU_TO_BUS_ADDR					0x0FFFFFFF

"CPU_TO_BUS_ADDR" is a very generic name.  Since you do have DRA7XX in
other #defines and static symbols in this file, maybe it could be DRA7XX to
make it obvious that it only applies here?

>  
>  struct dra7xx_pcie {
>  	void __iomem		*base;
> @@ -151,6 +152,18 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)
>  static void dra7xx_pcie_host_init(struct pcie_port *pp)
>  {
>  	dw_pcie_setup_rc(pp);
> +
> +	if (pp->io_mod_base)
> +		pp->io_mod_base &= CPU_TO_BUS_ADDR;

These are equivalent to

  pp->io_mod_base &= CPU_TO_BUS_ADDR;

(You don't need to test whether they're zero first.)

> +
> +	if (pp->mem_mod_base)
> +		pp->mem_mod_base &= CPU_TO_BUS_ADDR;
> +
> +	if (pp->cfg0_mod_base) {
> +		pp->cfg0_mod_base &= CPU_TO_BUS_ADDR;
> +		pp->cfg1_mod_base &= CPU_TO_BUS_ADDR;
> +	}
> +
>  	dra7xx_pcie_establish_link(pp);
>  	if (IS_ENABLED(CONFIG_PCI_MSI))
>  		dw_pcie_msi_init(pp);
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 52aa6e3..75338a6 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -365,14 +365,10 @@ int dw_pcie_host_init(struct pcie_port *pp)
>  	struct of_pci_range range;
>  	struct of_pci_range_parser parser;
>  	struct resource *cfg_res;
> -	u32 val, na, ns;
> +	u32 val, ns;
>  	const __be32 *addrp;
>  	int i, index, ret;
>  
> -	/* Find the address cell size and the number of cells in order to get
> -	 * the untranslated address.
> -	 */
> -	of_property_read_u32(np, "#address-cells", &na);
>  	ns = of_n_size_cells(np);
>  
>  	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
> @@ -415,8 +411,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
>  			pp->io_base = range.cpu_addr;
>  
>  			/* Find the untranslated IO space address */
> -			pp->io_mod_base = of_read_number(parser.range -
> -							 parser.np + na, ns);
> +			pp->io_mod_base = range.cpu_addr;

So apparently 

  "of_read_number() == range.cpu_addr & CPU_TO_BUS_ADDR" on DRA7xx
  "of_read_number() == range.cpu_addr" everywhere else?

Is that right?  Is that a valid assumption, i.e., are we assuming
anything about DTs in the field that we shouldn't?

>  		}
>  		if (restype == IORESOURCE_MEM) {
>  			of_pci_range_to_resource(&range, np, &pp->mem);
> @@ -425,8 +420,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
>  			pp->mem_bus_addr = range.pci_addr;
>  
>  			/* Find the untranslated MEM space address */
> -			pp->mem_mod_base = of_read_number(parser.range -
> -							  parser.np + na, ns);
> +			pp->mem_mod_base = range.cpu_addr;
>  		}
>  		if (restype == 0) {
>  			of_pci_range_to_resource(&range, np, &pp->cfg);
> @@ -436,8 +430,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
>  			pp->cfg1_base = pp->cfg.start + pp->cfg0_size;
>  
>  			/* Find the untranslated configuration space address */
> -			pp->cfg0_mod_base = of_read_number(parser.range -
> -							   parser.np + na, ns);
> +			pp->cfg0_mod_base = range.cpu_addr;
>  			pp->cfg1_mod_base = pp->cfg0_mod_base +
>  					    pp->cfg0_size;
>  		}
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/