Subject: [PATCH v3 4/5] ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes

From: [email-masked] (Jisheng Zhang)
Date: Tue, 24 Nov 2015 18:27:09 +0800

+ Sebastian

On Tue, 24 Nov 2015 17:32:15 +0800
Chen-Yu Tsai wrote:

> This adds the supported PRCM clocks and reset controls to the A80 dtsi.
> The DAUDIO module clocks are not supported yet.
> 
> Also update clock and reset phandles for r_uart.
> 
> Signed-off-by: Chen-Yu Tsai <[email-masked]>
> ---
>  arch/arm/boot/dts/sun9i-a80.dtsi | 79 +++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 78 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
> index 1118bf5cc4fb..a4ce348c0831 100644
> --- a/arch/arm/boot/dts/sun9i-a80.dtsi
> +++ b/arch/arm/boot/dts/sun9i-a80.dtsi
> @@ -164,6 +164,14 @@
>  					     "usb_phy2", "usb_hsic_12M";
>  		};
>  
> +		pll3: clk at 06000008 {
> +			/* placeholder until implemented */
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-rate = <0>;
> +			clock-output-names = "pll3";
> +		};
> +
>  		pll4: clk at 0600000c {
>  			#clock-cells = <0>;
>  			compatible = "allwinner,sun9i-a80-pll4-clk";
> @@ -350,6 +358,68 @@
>  					"apb1_uart2", "apb1_uart3",
>  					"apb1_uart4", "apb1_uart5";
>  		};
> +
> +		cpus_clk: clk at 08001410 {
> +			compatible = "allwinner,sun9i-a80-cpus-clk";
> +			reg = <0x08001410 0x4>;
> +			#clock-cells = <0>;
> +			clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
> +			clock-output-names = "cpus";
> +		};
> +
> +		ahbs: ahbs_clk {
> +			compatible = "fixed-factor-clock";
> +			#clock-cells = <0>;
> +			clock-div = <1>;
> +			clock-mult = <1>;
> +			clocks = <&cpus_clk>;
> +			clock-output-names = "ahbs";
> +		};

Dear Sebastian and all,

I just want to take the sunxi clk support in mainline for example.

I'm not sure I understand correctly, it seems to me that some maintainers draw a
line: "having a node for every clock" is a no, no[1]. But here we saw one node for
cpus_clk and apbs below. And <0x08001410 0x4>; <0x0800141c 0x4>; shows they
are close each other, so should we merge them into a single clock complex node
then use mfd, regmap in clk driver?

But IMHO, sunxi dts nodes really represent real HW, so I still can't understand
why we could not have each node for cpus_clk and apbs. Can you please kindly
teach me?

Another question: is "Not having a node for every clock" a rule, Would you
please confirm? if yes, I'll strictly follow this rule.

[1]http://lists.infradead.org/pipermail/linux-arm-kernel/2015-November/387335.html

Thank you very much,
Jisheng

> +
> +		apbs: clk at 0800141c {
> +			compatible = "allwinner,sun8i-a23-apb0-clk";
> +			reg = <0x0800141c 0x4>;
> +			#clock-cells = <0>;
> +			clocks = <&ahbs>;
> +			clock-output-names = "apbs";
> +		};
> +
> +		apbs_gates: clk at 08001428 {
> +			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
> +			reg = <0x08001428 0x4>;
> +			#clock-cells = <1>;
> +			clocks = <&apbs>;
> +			clock-indices = <0>, <1>,
> +					<2>, <3>,
> +					<4>, <5>,
> +					<6>, <7>,
> +					<12>, <13>,
> +					<16>, <17>,
> +					<18>, <20>;
> +			clock-output-names = "apbs_pio", "apbs_ir",
> +					"apbs_timer", "apbs_rsb",
> +					"apbs_uart", "apbs_1wire",
> +					"apbs_i2c0", "apbs_i2c1",
> +					"apbs_ps2_0", "apbs_ps2_1",
> +					"apbs_dma", "apbs_i2s0",
> +					"apbs_i2s1", "apbs_twd";
> +		};

This is for gate clocks, so we have a node for gateclks. gateclks are merged
into one node.

> +
> +		r_1wire_clk: clk at 08001450 {
> +			reg = <0x08001450 0x4>;
> +			#clock-cells = <0>;
> +			compatible = "allwinner,sun4i-a10-mod0-clk";
> +			clocks = <&osc32k>, <&osc24M>;
> +			clock-output-names = "r_1wire";
> +		};
> +
> +		r_ir_clk: clk at 08001454 {
> +			reg = <0x08001454 0x4>;
> +			#clock-cells = <0>;
> +			compatible = "allwinner,sun4i-a10-mod0-clk";
> +			clocks = <&osc32k>, <&osc24M>;
> +			clock-output-names = "r_ir";
> +		};
>  	};
>  
>  	soc {
> @@ -764,13 +834,20 @@
>  			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
> +		apbs_rst: reset at 080014b0 {
> +			reg = <0x080014b0 0x4>;
> +			compatible = "allwinner,sun6i-a31-clock-reset";
> +			#reset-cells = <1>;
> +		};
> +
>  		r_uart: serial at 08002800 {
>  			compatible = "snps,dw-apb-uart";
>  			reg = <0x08002800 0x400>;
>  			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
>  			reg-shift = <2>;
>  			reg-io-width = <4>;
> -			clocks = <&osc24M>;
> +			clocks = <&apbs_gates 4>;
> +			resets = <&apbs_rst 4>;
>  			status = "disabled";
>  		};
>  	};