Subject: arm64: dts: qcom: Add apq8096 dragonboard dts skeletons

From: [email-masked] (Stephen Boyd)
Date: Mon, 30 Nov 2015 23:21:22 -0800

On 12/01, Rajendra Nayak wrote:
> 
> On 12/01/2015 05:18 AM, Stephen Boyd wrote:
> > On 11/26, Rajendra Nayak wrote:
> >> Add new dtsi and dts files for the apq8096 dragonboards with just
> >> a serial device used as debug console
> >>
> >> Signed-off-by: Rajendra Nayak <[email-masked]>
> >> ---
> >> Patch applies on top of Stephens' patches to add msm8996 dtsi
> >> https://lkml.org/lkml/2015/11/17/955
> >>
> >>  arch/arm64/boot/dts/qcom/Makefile                 |  2 +-
> >>  arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts  | 21 ++++++++++++++++
> >>  arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++
> >>  3 files changed, 52 insertions(+), 1 deletion(-)
> >>  create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
> >>  create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> >> index fa1f661..bd992ef 100644
> >> --- a/arch/arm64/boot/dts/qcom/Makefile
> >> +++ b/arch/arm64/boot/dts/qcom/Makefile
> >> @@ -1,5 +1,5 @@
> >>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
> >> -dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
> >> +dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb apq8096-dragonboard.dtb
> > 
> > We should move to one dtb per line in this file. Other platforms
> > are doing the same thing.
> 
> Sure, will repost with the change. I just saw the 8916/8016 ones were all in
> a single line so did the same.
> 

Yeah we should probably change the 8916 one too. Make everything
the same.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project