Subject: [PATCH v2] ARM: dts: imx7d: cl-som-imx7: add basic module support

From: [email-masked] (Shawn Guo)
Date: Mon, 14 Dec 2015 10:43:15 +0800

On Thu, Dec 10, 2015 at 04:01:37PM +0200, Igor Grinberg wrote:
> From: Ilya Ledvich <[email-masked]>
> 
> CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
> Freescale i.MX7 System-on-Chip family.
> 
> http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/
> 
> Add basic DT support for standalone module (without a carrier board):
> 
> * Memory configuration
> * I2C2 bus
> * PMIC
> * UART1
> 
> Signed-off-by: Ilya Ledvich <[email-masked]>
> Signed-off-by: Igor Grinberg <[email-masked]>
> Acked-by: Rob Herring <[email-masked]>
> ---
> 
> v2: use generic node name for pmic (Thanks Rob).
> 
>  arch/arm/boot/dts/Makefile                    |   1 +
>  arch/arm/boot/dts/imx7d-cl-som-imx7.dts       | 150 ++++++++++++++++++++++++++
>  3 files changed, 155 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
> index 34c88b0..30b0ba1 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.txt
> +++ b/Documentation/devicetree/bindings/arm/fsl.txt
> @@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board
>  Required root node properties:
>      - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
>  
> +i.MX7D CL-SOM-iMX7 Board
> +Required root node properties:
> +    - compatible = "compulab,cl-som-imx7", "fsl,imx7d";
> +

This is not a board produced by FSL, so it should be documented in
fsl.txt.

>  Generic i.MX boards
>  -------------------
>  
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 30bbc37..83ed521 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -350,6 +350,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
>  dtb-$(CONFIG_SOC_IMX6UL) += \
>  	imx6ul-14x14-evk.dtb
>  dtb-$(CONFIG_SOC_IMX7D) += \
> +	imx7d-cl-som-imx7.dtb \
>  	imx7d-sdb.dtb
>  dtb-$(CONFIG_SOC_LS1021A) += \
>  	ls1021a-qds.dtb \
> diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> new file mode 100644
> index 0000000..ba05198
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
> @@ -0,0 +1,150 @@
> +/*
> + * Support for CompuLab CL-SOM-iMX7 System-on-Module
> + *
> + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
> + * Author: Ilya Ledvich <[email-masked]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */

GPL/X11 dual licence is generally suggested for newly added dts files,
as it will let non-Linux OS use them.

> +
> +/dts-v1/;
> +
> +#include <dt-bindings/input/input.h>
> +#include "imx7d.dtsi"
> +
> +/ {
> +	model = "CompuLab CL-SOM-iMX7";
> +	compatible = "compulab,cl-som-imx7", "fsl,imx7d";
> +
> +	memory {
> +		reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
> +	};
> +};
> +
> +&cpu0 {
> +	arm-supply = <&sw1a_reg>;
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	pmic: pmic at 8 {
> +		compatible = "fsl,pfuze3000";
> +		reg = <0x08>;
> +
> +		regulators {
> +			sw1a_reg: sw1a {
> +				regulator-min-microvolt = <700000>;
> +				regulator-max-microvolt = <1475000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			/* use sw1c_reg to align with pfuze100/pfuze200 */
> +			sw1c_reg: sw1b {
> +				regulator-min-microvolt = <700000>;
> +				regulator-max-microvolt = <1475000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw2_reg: sw2 {
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1850000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3a_reg: sw3 {
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <1650000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			swbst_reg: swbst {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5150000>;
> +			};
> +
> +			snvs_reg: vsnvs {
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vref_reg: vrefddr {
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen1_reg: vldo1 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen2_reg: vldo2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen3_reg: vccsd {
> +				regulator-min-microvolt = <2850000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen4_reg: v33 {
> +				regulator-min-microvolt = <2850000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen5_reg: vldo3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen6_reg: vldo4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
> +	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	cl-som-imx7 {

Since commit (5fcdf6a7ed95 pinctrl: imx: Allow parsing DT without
function nodes), this level of container node is not really needed any
more.

Shawn

> +		pinctrl_i2c2: i2c2grp {
> +			fsl,pins = <
> +				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
> +				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
> +			>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <
> +				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
> +				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
> +			>;
> +		};
> +	};
> +};
> -- 
> 2.4.10
> 
>