Subject: [PATCH v6 7/7] ARM: dts: imx: Add support for Advantech/GE B850v3

From: [email-masked] (Shawn Guo)
Date: Thu, 28 Jan 2016 14:26:39 +0800

On Wed, Dec 23, 2015 at 05:00:16PM -0500, Akshay Bhat wrote:
> Add support for Advantech/GE B850v3 board.
> 
> Signed-off-by: Akshay Bhat <[email-masked]>
> ---
>  arch/arm/boot/dts/Makefile         |   1 +
>  arch/arm/boot/dts/imx6q-b850v3.dts | 157 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 158 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6q-b850v3.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 684a504..b6c6d7a 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -319,6 +319,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>  	imx6q-arm2.dtb \
>  	imx6q-b450v3.dtb \
>  	imx6q-b650v3.dtb \
> +	imx6q-b850v3.dtb \
>  	imx6q-cm-fx6.dtb \
>  	imx6q-cubox-i.dtb \
>  	imx6q-dfi-fs700-m60.dtb \
> diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
> new file mode 100644
> index 0000000..318ba65
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-b850v3.dts
> @@ -0,0 +1,157 @@
> +/*
> + * Copyright 2015 Timesys Corporation.
> + * Copyright 2015 General Electric Company
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License
> + *     version 2 as published by the Free Software Foundation.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6q-bx50v3.dtsi"
> +
> +/ {
> +	model = "General Electric B850v3";
> +	compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
> +
> +	chosen {
> +		stdout-path = &uart3;
> +	};
> +
> +	panel_lvds0 {

Hyphen please.

> +		compatible = "auo,b133htn01";
> +		backlight = <&backlight_lvds>;
> +		ddc-i2c-bus = <&mux_i2c12>;
> +
> +		port {
> +			panel_in_lvds0: endpoint {
> +				remote-endpoint = <&lvds0_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&ldb {
> +	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
> +			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
> +	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
> +				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
> +	fsl,dual-channel;
> +	status = "okay";
> +
> +	lvds0: lvds-channel at 0 {
> +		fsl,data-mapping = "spwg";
> +		fsl,data-width = <24>;
> +		status = "okay";
> +
> +		port at 4 {
> +			reg = <4>;
> +
> +			lvds0_out: endpoint {
> +				remote-endpoint = <&panel_in_lvds0>;
> +			};
> +		};
> +	};
> +};
> +
> +&i2c2 {
> +	pca9547_ddc: mux at 70 {
> +		compatible = "nxp,pca9547";
> +		reg = <0x70>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		mux_i2c11: i2c at 0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x0>;
> +		};
> +
> +		mux_i2c12: i2c at 1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x1>;
> +		};
> +
> +		mux_i2c13: i2c at 2 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x2>;
> +		};
> +
> +		mux_i2c14: i2c at 3 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x3>;
> +		};
> +
> +		mux_i2c15: i2c at 4 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x4>;
> +		};
> +
> +		mux_i2c16: i2c at 5 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x5>;
> +		};
> +
> +		mux_i2c17: i2c at 6 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x6>;
> +		};
> +
> +		mux_i2c18: i2c at 7 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x7>;
> +		};
> +	};
> +};
> +
> +&hdmi {
> +	ddc-i2c-bus = <&mux_i2c11>;
> +};
> +
> +&mux_i2c3 {
> +	ads7830_2: ads7830 at 4a {

What's the point to get this node labelled?  Where is ads7830_1?

Shawn

> +		compatible = "ti,ads7830";
> +		reg = <0x4a>;
> +	};
> +};
> -- 
> 2.6.3
> 
>