Subject: [PATCH v2 2/5] ARM: dts: imx: Add basic dts support for imx6qp-sabresd

From: [email-masked] (Shawn Guo)
Date: Thu, 28 Jan 2016 15:54:08 +0800

On Tue, Dec 15, 2015 at 02:07:50PM +0800, Bai Ping wrote:
> The patch adds dts file for imx6qp-sabresd board.
> 
> Signed-off-by: Bai Ping <[email-masked]>
> ---
>  arch/arm/boot/dts/Makefile             |  1 +
>  arch/arm/boot/dts/imx6qdl-sabresd.dtsi |  1 +
>  arch/arm/boot/dts/imx6qp-sabresd.dts   | 59 ++++++++++++++++++++++++++++++++++
>  3 files changed, 61 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6qp-sabresd.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 36d8133..dfba765 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -302,6 +302,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>  	imx6dl-sabreauto.dtb \
>  	imx6dl-sabrelite.dtb \
>  	imx6dl-sabresd.dtb \
> +	imx6qp-sabresd.dtb \

Please keep the list sort alphabetically.  That said,
imx6qp-sabresd.dtb should be added after imx6q-* ones.

>  	imx6dl-tx6dl-comtft.dtb \
>  	imx6dl-tx6u-801x.dtb \
>  	imx6dl-tx6u-811x.dtb \
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index a6d445c..f65f57b 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @@ -238,6 +238,7 @@
>  				regulator-max-microvolt = <3300000>;
>  				regulator-boot-on;
>  				regulator-always-on;
> +				regulator-ramp-delay = <6250>;

So this change applies to imx6q and imx6dl sabresd as well?

>  			};
>  
>  			sw3a_reg: sw3a {
> diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
> new file mode 100644
> index 0000000..c3ab2b6
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
> @@ -0,0 +1,59 @@
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "imx6q-sabresd.dts"
> +#include "imx6qp.dtsi"

Ah, that's why you do not include "imx6qdl.dtsi" in imx6qp.dtsi.  I have
a question with this approach.  How people should write his imx6qp board
dts file, if his board never has an imx6q version?

> +
> +/ {
> +	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
> +	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
> +};
> +
> +&cpu0 {
> +	arm-supply = <&sw2_reg>;
> +};
> +
> +&iomuxc {
> +	imx6qdl-sabresd {

Since commit 5fcdf6a7ed95 (pinctrl: imx: Allow parsing DT without
function nodes), this additional container node can just be saved.

Shawn

> +		pinctrl_usdhc2: usdhc2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
> +				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
> +				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
> +				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
> +				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
> +				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
> +				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
> +				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
> +				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
> +				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
> +			>;
> +		};
> +
> +		pinctrl_usdhc3: usdhc3grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
> +				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
> +				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
> +				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
> +				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
> +				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
> +				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
> +				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
> +				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
> +				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
> +			>;
> +		};
> +	};
> +};
> +
> +&pcie {
> +	power-on-gpio = <&gpio3 19 0>;
> +	reset-gpio = <&gpio7 12 0>;
> +	status = "okay";
> +};
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>