Subject: [PATCH V2 5/5] Microblaze: Modifying microblaze PCI subsytem to support generic Xilinx AXI PCIe Host Bridge IP driver

From: [email-masked] (Bjorn Helgaas)
Date: Wed, 3 Feb 2016 10:32:07 -0600

[+cc Ben, pcibios_get_phb_of_node() question]

On Tue, Jan 12, 2016 at 11:06:13PM +0530, Bharat Kumar Gogada wrote:
> This patch does required modifications to microblaze PCI subsystem, to
> work with generic driver (drivers/pci/host/pcie-xilinx.c) on Microblaze
> and Zynq.
> 
> Signed-off-by: Bharat Kumar Gogada <[email-masked]>
> Signed-off-by: Ravi Kiran Gummaluri <[email-masked]>
>...

>  resource_size_t pcibios_align_resource(void *data, const struct resource *res,
>  				resource_size_t size, resource_size_t align)
>  {
> -	struct pci_dev *dev = data;
>  	resource_size_t start = res->start;
>  
> -	if (res->flags & IORESOURCE_IO) {
> -		if (skip_isa_ioresource_align(dev))
> -			return start;
> -		if (start & 0x300)
> -			start = (start + 0x3ff) & ~0x3ff;
> -	}
> -
>  	return start;

"return res->start;" is sufficient; no need for a temporary variable.

>  }
>  EXPORT_SYMBOL(pcibios_align_resource);
>  
> +int pcibios_add_device(struct pci_dev *dev)
> +{
> +	dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(pcibios_add_device);
> +
>  /*
>   * Reparent resource children of pr that conflict with res
>   * under res, and make res replace those children.
> @@ -1335,9 +1308,21 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
>  
>  struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
>  {
> -	struct pci_controller *hose = bus->sysdata;
> +	struct device_node *np;
> +
> +	for_each_node_by_type(np, "pci") {
> +		const void *prop;
> +		unsigned int bus_min;
> +
> +		prop = of_get_property(np, "bus-range", NULL);
> +		if (!prop)
> +			continue;
> +		bus_min = be32_to_cpup(prop);
> +		if (bus->number == bus_min)
> +			return np;
> +	}
>  
> -	return of_node_get(hose->dn);
> +	return NULL;

Hmmm.  The old microblaze code ("return of_node_get(hose->dn);") is
basically the same as the mips and powerpc versions.  The new code is
basically the same as the x86 version.

I like the generic weak version in drivers/pci/of.c because it doesn't
use any arch-specific data, and it looks like if we just set the
struct device.of_node members correctly, everything should Just Work.

But Ben added both the generic and the x86 versions the same day, so
there must be some complication:

  98d9f30c820d ("pci/of: Match PCI devices to OF nodes dynamically")
  3d5fe5a65af9 ("x86/devicetree: Use generic PCI <-> OF matching")

So I guess my question is, why do we need a microblaze-specific
version at all?

Bjorn