From: will.deacon@arm•com (Will Deacon)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 4/4] iommu/arm-smmu: Use per-context TLB sync as appropriate
Date: Tue, 9 Feb 2016 14:15:09 +0000 [thread overview]
Message-ID: <20160209141508.GO22874@arm.com> (raw)
In-Reply-To: <fc2ede950aea2e84a0b7cf93e4cd605f0cbdf3c3.1453830752.git.robin.murphy@arm.com>
On Tue, Jan 26, 2016 at 06:06:37PM +0000, Robin Murphy wrote:
> TLB synchronisation is a mighty big hammmer to bring down on the
> transaction stream, typically stalling all in-flight transactions until
> the sync completes. Since in most cases (except at stage 2 on SMMUv1)
> a per-context sync operation is available, prefer that over the global
> operation when performing TLB maintenance for a single domain, to avoid
> unecessarily disrupting ongoing traffic in other contexts.
>
> Signed-off-by: Robin Murphy <robin.murphy@arm•com>
> ---
> drivers/iommu/arm-smmu.c | 32 ++++++++++++++++++++++++--------
> 1 file changed, 24 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
> index 18e0e10..bf1895c 100644
> --- a/drivers/iommu/arm-smmu.c
> +++ b/drivers/iommu/arm-smmu.c
> @@ -219,6 +219,8 @@
> #define ARM_SMMU_CB_S1_TLBIVAL 0x620
> #define ARM_SMMU_CB_S2_TLBIIPAS2 0x630
> #define ARM_SMMU_CB_S2_TLBIIPAS2L 0x638
> +#define ARM_SMMU_CB_TLBSYNC 0x7f0
> +#define ARM_SMMU_CB_TLBSTATUS 0x7f4
> #define ARM_SMMU_CB_ATS1PR 0x800
> #define ARM_SMMU_CB_ATSR 0x8f0
>
> @@ -546,14 +548,22 @@ static void __arm_smmu_free_bitmap(unsigned long *map, int idx)
> }
>
> /* Wait for any pending TLB invalidations to complete */
> -static void __arm_smmu_tlb_sync(struct arm_smmu_device *smmu)
> +static void __arm_smmu_tlb_sync(struct arm_smmu_device *smmu, int cbndx)
> {
> int count = 0;
> - void __iomem *gr0_base = ARM_SMMU_GR0(smmu);
> + void __iomem *base, __iomem *status;
>
> - writel_relaxed(0, gr0_base + ARM_SMMU_GR0_sTLBGSYNC);
> - while (readl_relaxed(gr0_base + ARM_SMMU_GR0_sTLBGSTATUS)
> - & sTLBGSTATUS_GSACTIVE) {
> + if (cbndx < 0) {
> + base = ARM_SMMU_GR0(smmu);
> + status = base + ARM_SMMU_GR0_sTLBGSTATUS;
> + writel_relaxed(0, base + ARM_SMMU_GR0_sTLBGSYNC);
> + } else {
> + base = ARM_SMMU_CB_BASE(smmu) + ARM_SMMU_CB(smmu, cbndx);
> + status = base + ARM_SMMU_CB_TLBSTATUS;
> + writel_relaxed(0, base + ARM_SMMU_CB_TLBSYNC);
> + }
> +
> + while (readl_relaxed(status) & sTLBGSTATUS_GSACTIVE) {
> cpu_relax();
> if (++count == TLB_LOOP_TIMEOUT) {
> dev_err_ratelimited(smmu->dev,
> @@ -567,7 +577,13 @@ static void __arm_smmu_tlb_sync(struct arm_smmu_device *smmu)
> static void arm_smmu_tlb_sync(void *cookie)
> {
> struct arm_smmu_domain *smmu_domain = cookie;
> - __arm_smmu_tlb_sync(smmu_domain->smmu);
> + int cbndx = smmu_domain->cfg.cbndx;
> +
> + if (smmu_domain->stage == ARM_SMMU_DOMAIN_S2 &&
> + smmu_domain->smmu->version < ARM_SMMU_V2)
> + cbndx = -1;
I think it would be cleaner just to override the sync function pointer
when we initialise a stage-2 page table for an SMMUv1 implementation.
Any reason not to go that way?
Will
next prev parent reply other threads:[~2016-02-09 14:15 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-26 18:06 [PATCH 0/4] Miscellaneous ARM SMMU patches Robin Murphy
2016-01-26 18:06 ` [PATCH 1/4] iommu/arm-smmu: Treat all device transactions as unprivileged Robin Murphy
2016-01-27 6:00 ` Anup Patel
2016-02-09 14:08 ` Will Deacon
2016-01-26 18:06 ` [PATCH 2/4] iommu/arm-smmu: Allow disabling unmatched stream bypass Robin Murphy
2016-02-09 14:06 ` Will Deacon
2016-02-10 12:10 ` Robin Murphy
2016-02-10 14:25 ` [PATCH v2] " Robin Murphy
2016-01-26 18:06 ` [PATCH 3/4] iommu/arm-smmu: Support DMA-API domains Robin Murphy
2016-01-26 18:06 ` [PATCH 4/4] iommu/arm-smmu: Use per-context TLB sync as appropriate Robin Murphy
2016-02-09 14:15 ` Will Deacon [this message]
2016-02-10 11:58 ` Robin Murphy
2016-02-09 14:16 ` [PATCH 0/4] Miscellaneous ARM SMMU patches Will Deacon
-- strict thread matches above, loose matches on Subject: below --
2017-03-07 18:09 [PATCH 0/4] ARM SMMU per-context TLB sync Robin Murphy
2017-03-07 18:09 ` [PATCH 4/4] iommu/arm-smmu: Use per-context TLB sync as appropriate Robin Murphy
2017-03-30 14:37 ` Will Deacon
2017-03-30 15:48 ` Robin Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160209141508.GO22874@arm.com \
--to=will.deacon@arm$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox