Subject: [PATCH v3 4/5] arm64/perf: Enable PMCR long cycle counter bit

From: [email-masked] (Will Deacon)
Date: Mon, 15 Feb 2016 19:55:29 +0000

On Wed, Feb 03, 2016 at 06:11:59PM +0100, Jan Glauber wrote:
> With the long cycle counter bit (LC) disabled the cycle counter is not
> working on ThunderX SOC (ThunderX only implements Aarch64).
> Also, according to documentation LC == 0 is deprecated.
> 
> To keep the code simple the patch does not introduce 64 bit wide counter
> functions. Instead writing the cycle counter always sets the upper
> 32 bits so overflow interrupts are generated as before.

I guess we could look into chained events if we wanted to go the whole
hog and support 64-bit counters, but this looks fine for now.

> Original patch from Andrew Pinksi <[email-masked]>
> 
> Signed-off-by: Jan Glauber <[email-masked]>
> ---
>  arch/arm64/kernel/perf_event.c | 21 ++++++++++++++++-----
>  1 file changed, 16 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
> index c038e4e..5e4275e 100644
> --- a/arch/arm64/kernel/perf_event.c
> +++ b/arch/arm64/kernel/perf_event.c
> @@ -405,6 +405,7 @@ static const struct attribute_group *armv8_pmuv3_attr_groups[] = {
>  #define ARMV8_PMCR_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
>  #define ARMV8_PMCR_X		(1 << 4) /* Export to ETM */
>  #define ARMV8_PMCR_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
> +#define ARMV8_PMCR_LC		(1 << 6) /* Overflow on 64 bit cycle counter */
>  #define	ARMV8_PMCR_N_SHIFT	11	 /* Number of counters supported */
>  #define	ARMV8_PMCR_N_MASK	0x1f
>  #define	ARMV8_PMCR_MASK		0x3f	 /* Mask for writable bits */
> @@ -494,9 +495,16 @@ static inline void armv8pmu_write_counter(struct perf_event *event, u32 value)
>  	if (!armv8pmu_counter_valid(cpu_pmu, idx))
>  		pr_err("CPU%u writing wrong counter %d\n",
>  			smp_processor_id(), idx);
> -	else if (idx == ARMV8_IDX_CYCLE_COUNTER)
> -		asm volatile("msr pmccntr_el0, %0" :: "r" (value));
> -	else if (armv8pmu_select_counter(idx) == idx)
> +	else if (idx == ARMV8_IDX_CYCLE_COUNTER) {
> +		/*
> +		 * Set the upper 32bits as this is a 64bit counter but we only
> +		 * count using the lower 32bits and we want an interrupt when
> +		 * it overflows.
> +		 */
> +		u64 value64 = 0xffffffff00000000ULL | value;
> +
> +		asm volatile("msr pmccntr_el0, %0" :: "r" (value64));
> +	} else if (armv8pmu_select_counter(idx) == idx)
>  		asm volatile("msr pmxevcntr_el0, %0" :: "r" (value));
>  }
>  
> @@ -768,8 +776,11 @@ static void armv8pmu_reset(void *info)
>  		armv8pmu_disable_intens(idx);
>  	}
>  
> -	/* Initialize & Reset PMNC: C and P bits. */
> -	armv8pmu_pmcr_write(ARMV8_PMCR_P | ARMV8_PMCR_C);
> +	/*
> +	 * Initialize & Reset PMNC. Request overflow on 64 bit but
> +	 * cheat in armv8pmu_write_counter().

Can you expand the comment to mention that the 64-bit overflow is only
for the cycle counter, please?

Will