From: andrew@lunn•ch (Andrew Lunn)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v4] ARM: dts: kirkwood: Add DTS for Linksys EA4200v2/EA4500\
Date: Mon, 4 Apr 2016 16:55:28 +0200 [thread overview]
Message-ID: <20160404145528.GE25131@lunn.ch> (raw)
In-Reply-To: <1459781168-16708-1-git-send-email-bert@biot.com>
On Mon, Apr 04, 2016 at 04:46:07PM +0200, Bert Vermeulen wrote:
> This platform is based on a Marvell 88E6282 SoC and 88E6171 switch.
>
> Signed-off-by: Bert Vermeulen <bert@biot•com>
Reviewed-by: Andrew Lunn <andrew@lunn•ch>
Thanks
Andrew
> ---
> Changes from v3:
> - added comment noting eth1 is connected to switch as well
>
> Changes from v2:
> - added linksys to filename
> - added make rule
>
> Changes from v1:
> - changed console to stdout-path
> - removed unnecesarry @0 from dsa node, and fixed dsa/switch node
> - fixed partitions according to the official docs
> - prefer node labels rather than full hierarchy where possible
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/kirkwood-linksys-viper.dts | 237 +++++++++++++++++++++++++++
> 2 files changed, 238 insertions(+)
> create mode 100644 arch/arm/boot/dts/kirkwood-linksys-viper.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 95c1923..feeb3f9 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -199,6 +199,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
> kirkwood-linkstation-lswsxl.dtb \
> kirkwood-linkstation-lswvl.dtb \
> kirkwood-linkstation-lswxl.dtb \
> + kirkwood-linksys-viper.dtb \
> kirkwood-lschlv2.dtb \
> kirkwood-lsxhl.dtb \
> kirkwood-mplcec4.dtb \
> diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
> new file mode 100644
> index 0000000..0f4631f
> --- /dev/null
> +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
> @@ -0,0 +1,237 @@
> +/*
> + * kirkwood-viper.dts - Device Tree file for Linksys viper (E4200v2 / EA4500)
> + *
> + * (c) 2013 Jonas Gorski <jogo@openwrt•org>
> + * (c) 2013 Deutsche Telekom Innovation Laboratories
> + * (c) 2014 Luka Perkov <luka@openwrt•org>
> + * (c) 2014 Randy C. Will <randall.will@gmail•com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +/dts-v1/;
> +
> +#include "kirkwood.dtsi"
> +#include "kirkwood-6282.dtsi"
> +
> +/ {
> + model = "Linksys Viper (E4200v2 / EA4500)";
> + compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x8000000>;
> + };
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
> + pinctrl-names = "default";
> +
> + wps {
> + label = "WPS Button";
> + linux,code = <KEY_WPS_BUTTON>;
> + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
> + };
> +
> + reset {
> + label = "Reset Button";
> + linux,code = <KEY_RESTART>;
> + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
> + pinctrl-names = "default";
> +
> + white-health {
> + label = "viper:white:health";
> + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
> + };
> +
> + white-pulse {
> + label = "viper:white:pulse";
> + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + dsa {
> + compatible = "marvell,dsa";
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + dsa,ethernet = <ð0port>;
> + dsa,mii-bus = <&mdio>;
> +
> + switch at 16,0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <16 0>; /* MDIO address 16, switch 0 in tree */
> +
> + port at 0 {
> + reg = <0>;
> + label = "ethernet1";
> + };
> +
> + port at 1 {
> + reg = <1>;
> + label = "ethernet2";
> + };
> +
> + port at 2 {
> + reg = <2>;
> + label = "ethernet3";
> + };
> +
> + port at 3 {
> + reg = <3>;
> + label = "ethernet4";
> + };
> +
> + port at 4 {
> + reg = <4>;
> + label = "internet";
> + };
> +
> + port at 5 {
> + reg = <5>;
> + label = "cpu";
> + };
> + };
> + };
> +};
> +
> +&pinctrl {
> + pmx_led_white_health: pmx-led-white-health {
> + marvell,pins = "mpp7";
> + marvell,function = "gpo";
> + };
> + pmx_led_white_pulse: pmx-led-white-pulse {
> + marvell,pins = "mpp14";
> + marvell,function = "gpio";
> + };
> + pmx_btn_wps: pmx-btn-wps {
> + marvell,pins = "mpp47";
> + marvell,function = "gpio";
> + };
> + pmx_btn_reset: pmx-btn-reset {
> + marvell,pins = "mpp48";
> + marvell,function = "gpio";
> + };
> +};
> +
> +&nand {
> + status = "okay";
> + pinctrl-0 = <&pmx_nand>;
> + pinctrl-names = "default";
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x80000>;
> + read-only;
> + };
> +
> + partition at 80000 {
> + label = "u_env";
> + reg = <0x80000 0x20000>;
> + };
> +
> + partition at A0000 {
> + label = "s_env";
> + reg = <0xA0000 0x20000>;
> + };
> +
> + partition at 200000 {
> + label = "kernel";
> + reg = <0x200000 0x2A0000>;
> + };
> +
> + partition at 4A0000 {
> + label = "rootfs";
> + reg = <0x4A0000 0x1760000>;
> + };
> +
> + partition at 1C00000 {
> + label = "alt_kernel";
> + reg = <0x1C00000 0x2A0000>;
> + };
> +
> + partition at 1EA0000 {
> + label = "alt_rootfs";
> + reg = <0x1EA0000 0x1760000>;
> + };
> +
> + partition at 3600000 {
> + label = "syscfg";
> + reg = <0x3600000 0x4A00000>;
> + };
> +
> + partition at C0000 {
> + label = "unused";
> + reg = <0xC0000 0x140000>;
> + };
> +
> + };
> +};
> +
> +&pciec {
> + status = "okay";
> +};
> +
> +&pcie0 {
> + status = "okay";
> +};
> +
> +&pcie1 {
> + status = "okay";
> +};
> +
> +&mdio {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
> + * fixed speed and duplex. */
> +ð0 {
> + status = "okay";
> + ethernet0-port at 0 {
> + speed = <1000>;
> + duplex = <1>;
> + };
> +};
> +
> +/* eth1 is connected to the switch at port 6. However DSA only supports a
> + * single CPU port. So leave this port disabled to avoid confusion. */
> +ð1 {
> + status = "disabled";
> +};
> +
> +/* There is no battery on the board, so the RTC does not keep
> + time when there is no power, making it useless. */
> +&rtc {
> + status = "disabled";
> +};
> +
> --
> 1.9.1
>
next prev parent reply other threads:[~2016-04-04 14:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-04 14:46 [PATCH v4] ARM: dts: kirkwood: Add DTS for Linksys EA4200v2/EA4500 Bert Vermeulen
2016-04-04 14:55 ` Andrew Lunn [this message]
2016-04-05 11:50 ` [PATCH v4] ARM: dts: kirkwood: Add DTS for Linksys EA4200v2/EA4500\ Imre Kaloz
2016-04-07 22:30 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160404145528.GE25131@lunn.ch \
--to=andrew@lunn$(echo .)ch \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox