Subject: [PATCH v5 06/11] thermal: qcom: tsens-8996: Add support for 8996 family of SoCs

From: [email-masked] (Eduardo Valentin)
Date: Wed, 27 Apr 2016 17:13:17 -0700

On Thu, Apr 14, 2016 at 03:01:54PM +0530, Rajendra Nayak wrote:
> The TSENS controller in 8996 family of SoCs is capable of converting the
> ADC code outputs to real temperature values (in decidegree Celsius).
> It can also be programmed to provide raw ADC code, but the secure software
> on 8996 programs it to provide real temperatures and also does the needed
> calibrations.
> 
> We check the valid bit to ensure valid data is read by the AHB master.
> And the spec recommends the below algorithm to read data 3 consecutive
> times, which takes care of the worst case delay taken to propogate the

s/propogate/propagate/g ?

> updated data to the register.
> 
> Signed-off-by: Rajendra Nayak <[email-masked]>
> ---
>  drivers/thermal/qcom/Makefile     |  2 +-
>  drivers/thermal/qcom/tsens-8996.c | 82 +++++++++++++++++++++++++++++++++++++++
>  drivers/thermal/qcom/tsens.c      |  3 ++
>  drivers/thermal/qcom/tsens.h      |  2 +-
>  4 files changed, 87 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/thermal/qcom/tsens-8996.c
> 
> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
> index f3cefd1..2cc2193 100644
> --- a/drivers/thermal/qcom/Makefile
> +++ b/drivers/thermal/qcom/Makefile
> @@ -1,2 +1,2 @@
>  obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
> -qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o
> +qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
> diff --git a/drivers/thermal/qcom/tsens-8996.c b/drivers/thermal/qcom/tsens-8996.c
> new file mode 100644
> index 0000000..3d70aa0
> --- /dev/null
> +++ b/drivers/thermal/qcom/tsens-8996.c
> @@ -0,0 +1,82 @@
> +/*
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include "tsens.h"
> +
> +#define STATUS_OFFSET	0x10a0
> +#define LAST_TEMP_MASK	0xfff
> +#define STATUS_VALID_BIT	BIT(21)
> +#define CODE_SIGN_BIT		BIT(11)
> +
> +static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
> +{
> +	struct tsens_sensor *s = &tmdev->sensor[id];
> +	u32 code;
> +	unsigned int sensor_addr;
> +	int last_temp = 0, last_temp2 = 0, last_temp3 = 0, ret;
> +
> +	sensor_addr = STATUS_OFFSET + s->hw_id * 4;
> +	ret = regmap_read(tmdev->map, sensor_addr, &code);
> +	if (ret)
> +		return ret;
> +	last_temp = code & LAST_TEMP_MASK;
> +	if (code & STATUS_VALID_BIT)
> +		goto done;
> +
> +	/* Try a second time */
> +	ret = regmap_read(tmdev->map, sensor_addr, &code);
> +	if (ret)
> +		return ret;
> +	if (code & STATUS_VALID_BIT) {
> +		last_temp = code & LAST_TEMP_MASK;
> +		goto done;
> +	} else
> +		last_temp2 = code & LAST_TEMP_MASK;

I believe coding style suggests you to use {} on all arms in this if.

> +
> +	/* Try a third/last time */
> +	ret = regmap_read(tmdev->map, sensor_addr, &code);
> +	if (ret)
> +		return ret;
> +	if (code & STATUS_VALID_BIT) {
> +		last_temp = code & LAST_TEMP_MASK;
> +		goto done;
> +	} else
> +		last_temp3 = code & LAST_TEMP_MASK;
> +

ditto.

> +	if (last_temp == last_temp2)
> +		last_temp = last_temp2;
> +	else if (last_temp2 == last_temp3)
> +		last_temp = last_temp3;
> +done:
> +	/* Code sign bit is the sign extension for a negative value */
> +	if (last_temp & CODE_SIGN_BIT)
> +		last_temp |= ~CODE_SIGN_BIT;
> +
> +	/* Temperatures are in deciCelicius */
> +	*temp = last_temp * 100;
> +
> +	return 0;
> +}
> +
> +const struct tsens_ops ops_8996 = {
> +	.init		= init_common,
> +	.get_temp	= get_temp_8996,
> +};
> +
> +const struct tsens_data data_8996 = {
> +	.num_sensors	= 13,
> +	.ops		= &ops_8996,
> +};
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 096f64d..9ebe020 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -69,6 +69,9 @@ static const struct of_device_id tsens_table[] = {
>  	}, {
>  		.compatible = "qcom,msm8974-tsens",
>  		.data = &data_8974,
> +	}, {
> +		.compatible = "qcom,msm8996-tsens",
> +		.data = &data_8996,
>  	},
>  	{}
>  };
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index 146d4f1..4a12df2 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -87,6 +87,6 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
>  int init_common(struct tsens_device *);
>  int get_temp_common(struct tsens_device *, int, int *);
>  
> -extern const struct tsens_data data_8916, data_8974, data_8960;
> +extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
>  
>  #endif /* __QCOM_TSENS_H__ */
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>