Subject: usb: dwc3: host: inherit dma configuration from parent dev

From: [email-masked] (Brian Norris)
Date: Thu, 5 May 2016 10:07:52 -0700

On Mon, Apr 25, 2016 at 10:21:34PM +0300, Strashko, Grygorii wrote:
> Now not all DMA paremters configured properly for "xhci-hcd" platform
> device which is created manually. For example: dma_pfn_offset, dam_ops
> and iommu configuration will not corresponds "dwc3" devices
> configuration. As result, this will cause problems like wrong DMA
> addresses translation on platforms with LPAE enabled like Keystone 2.
> 
> When platform is using DT boot mode the DMA configuration will be
> parsed and applied from DT, so, to fix this issue, reuse
> of_dma_configure() API and retrieve DMA configuartion for "xhci-hcd"
> from DWC3 device node.
> 
> Cc: David Fisher <[email-masked]>
> Cc: Catalin Marinas <[email-masked]>
> Cc: "Thang Q. Nguyen" <[email-masked]>
> Cc: Yoshihiro Shimoda <[email-masked]>
> Signed-off-by: Grygorii Strashko <[email-masked]>

Tested-by: Brian Norris <[email-masked]>

What's the status of this? I see that there was some divergent
discussion about the merits of a dma_inherit() API...

FWIW, I'll reiterate Grygorii's note that Felipe's alternative patch
does NOT resolve the problem with the creation of the xhci-hcd platform
device:

https://patchwork.kernel.org/patch/8952721/

Brian

> ---
> drivers/usb/dwc3/host.c | 15 ++++++++++-----
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index c679f63..93c8ef9 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -17,6 +17,7 @@
>  
>  #include <linux/platform_device.h>
>  #include <linux/usb/xhci_pdriver.h>
> +#include <linux/of_device.h>
>  
>  #include "core.h"
>  
> @@ -32,12 +33,7 @@ int dwc3_host_init(struct dwc3 *dwc)
>  		return -ENOMEM;
>  	}
>  
> -	dma_set_coherent_mask(&xhci->dev, dwc->dev->coherent_dma_mask);
> -
>  	xhci->dev.parent	= dwc->dev;
> -	xhci->dev.dma_mask	= dwc->dev->dma_mask;
> -	xhci->dev.dma_parms	= dwc->dev->dma_parms;
> -
>  	dwc->xhci = xhci;
>  
>  	ret = platform_device_add_resources(xhci, dwc->xhci_resources,
> @@ -62,6 +58,15 @@ int dwc3_host_init(struct dwc3 *dwc)
>  	phy_create_lookup(dwc->usb3_generic_phy, "usb3-phy",
>  			  dev_name(&xhci->dev));
>  
> +	if (IS_ENABLED(CONFIG_OF) && dwc->dev->of_node) {
> +		of_dma_configure(&xhci->dev, dwc->dev->of_node);
> +	} else {
> +		dma_set_coherent_mask(&xhci->dev, dwc->dev->coherent_dma_mask);
> +
> +		xhci->dev.dma_mask	= dwc->dev->dma_mask;
> +		xhci->dev.dma_parms	= dwc->dev->dma_parms;
> +	}
> +
>  	ret = platform_device_add(xhci);
>  	if (ret) {
>  		dev_err(dwc->dev, "failed to register xHCI device\n");