Subject: [PATCH] ARM: dts: omap5-igep0050: Correct hdmi regulator

From: [email-masked] (Tony Lindgren)
Date: Thu, 12 May 2016 09:57:56 -0700

* Eduard Gavin <[email-masked]> [160509 07:43]:
> Dear Nishanth,
>   In igepV5 the LDO7 is connected to:
>     VDDA_DSIPORTA - ball AA33
>     VDDA_DSIPORTC - ball AE33
>     VDDA_HDMI - ball AN25
>   LDO4 is connected to:
>     VPP1 - ball AD9

Thanks for the info, here's an updated patch with comments and now
using 1.8V instead of the 2.0V omap5-board-common.dtsi.

Regards,

Tony

8< -----------------
From: Tony Lindgren <[email-masked]>
Date: Mon, 9 May 2016 07:51:00 -0700
Subject: [PATCH] ARM: dts: Fix ldo7 source for HDMI on igepv5

Fix ldo7 source for HDMI on igepv5.

Suggested-by: Peter Ujfalusi <[email-masked]>
Signed-off-by: Tony Lindgren <[email-masked]>

--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -35,6 +35,16 @@
 	};
 };
 
+/*
+ * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33
+ * VDDA_HDMI - ball AN25. LDO4 is: VPP1 - ball AD9.
+ */
+&ldo7_reg {
+	status = "okay";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
 &omap5_pmx_core {
 	i2c4_pins: pinmux_i2c4_pins {
 		pinctrl-single,pins = <