Subject: [PATCH v3 2/5] pinctrl: samsung: Add GPF support for Exynos5433

From: [email-masked] (Krzysztof Kozlowski)
Date: Thu, 3 Nov 2016 21:20:02 +0200

On Thu, Nov 03, 2016 at 03:39:06PM +0900, Chanwoo Choi wrote:
> This patch add the support of GPF[1-5] pin of Exynos5433 SoC. The GPFx need
> to support the multiple memory map because the registers of GPFx are located
> in the different domain.
> 
> Cc: Tomasz Figa <[email-masked]>
> Cc: Krzysztof Kozlowski <[email-masked]>
> Cc: Sylwester Nawrocki <[email-masked]>
> Cc: Kukjin Kim <[email-masked]>
> Cc: Linus Walleij <[email-masked]>
> Cc: Rob Herring <[email-masked]>
> Cc: Mark Rutland <[email-masked]>
> Cc: linux-gpio at vger.kernel.org
> Signed-off-by: Joonyoung Shim <[email-masked]>
> Signed-off-by: Chanwoo Choi <[email-masked]>
> ---
>  drivers/pinctrl/samsung/pinctrl-exynos.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

I think that, instead of in previous patch, the
"samsung,exynos5433-pinctrl" compatible should be documented here along
with information that it requires two addresses for mappings.

Best regards,
Krzysztof

> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
> index d657b52dfdb5..12f7d1eb65bc 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
> @@ -1339,6 +1339,11 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
>  	EXYNOS_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
>  	EXYNOS_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
>  	EXYNOS_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
> +	EXYNOS_PIN_BANK_EINTW_EXT(8, 0x020, "gpf1", 0x1004, 1),
> +	EXYNOS_PIN_BANK_EINTW_EXT(4, 0x040, "gpf2", 0x1008, 1),
> +	EXYNOS_PIN_BANK_EINTW_EXT(4, 0x060, "gpf3", 0x100c, 1),
> +	EXYNOS_PIN_BANK_EINTW_EXT(8, 0x080, "gpf4", 0x1010, 1),
> +	EXYNOS_PIN_BANK_EINTW_EXT(8, 0x0a0, "gpf5", 0x1014, 1),
>  };
>  
>  /* pin banks of exynos5433 pin-controller - AUD */
> @@ -1420,6 +1425,7 @@ static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata)
>  		.eint_wkup_init = exynos_eint_wkup_init,
>  		.suspend	= exynos_pinctrl_suspend,
>  		.resume		= exynos_pinctrl_resume,
> +		.nr_ext_resources = 1,
>  	}, {
>  		/* pin-controller instance 1 data */
>  		.pin_banks	= exynos5433_pin_banks1,
> -- 
> 1.9.1
>