Subject: [PATCH 2/3] ARM: dts: reference PM8058 as IRQ parent

From: [email-masked] (Bjorn Andersson)
Date: Thu, 3 Nov 2016 14:53:08 -0700

On Thu 03 Nov 02:13 PDT 2016, Linus Walleij wrote:

> Some nodes are referencing the pm8058_gpio as IRQ parent, but
> the HW IRQ offset they are supplying is actually that for the
> parent to that controller: the PM8058 itself. Since that is the
> proper parent, reference it directly.
> 
> We can switch this to the pm8058_gpio and the proper offset
> once we have fixed the SSBI GPIO driver to properly deal with
> the hierarchical IRQ domain and get proper local offset
> translation.
> 
> Signed-off-by: Linus Walleij <[email-masked]>

Acked-by: Bjorn Andersson <[email-masked]>

Regards,
Bjorn

> ---
>  arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> index 4a532ddab53a..ea660ffa03ea 100644
> --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> @@ -369,8 +369,8 @@
>  				ak8975 at 0c {
>  					compatible = "asahi-kasei,ak8975";
>  					reg = <0x0c>;
> -					/* GPIO33 has interrupt 224 on the PM8058 */
> -					interrupt-parent = <&pm8058_gpio>;
> +					/* FIXME: GPIO33 has interrupt 224 on the PM8058 */
> +					interrupt-parent = <&pm8058>;
>  					interrupts = <224 IRQ_TYPE_EDGE_RISING>;
>  					pinctrl-names = "default";
>  					pinctrl-0 = <&dragon_ak8975_gpios>;
> @@ -380,8 +380,8 @@
>  				bmp085 at 77 {
>  					compatible = "bosch,bmp085";
>  					reg = <0x77>;
> -					/* GPIO16 has interrupt 207 on the PM8058 */
> -					interrupt-parent = <&pm8058_gpio>;
> +					/* FIXME: GPIO16 has interrupt 207 on the PM8058 */
> +					interrupt-parent = <&pm8058>;
>  					interrupts = <207 IRQ_TYPE_EDGE_RISING>;
>  					reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
>  					pinctrl-names = "default";
> -- 
> 2.7.4
>