From: andrew@lunn•ch (Andrew Lunn)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH RFC] ARM: dts: add support for Turris Omnia
Date: Sat, 5 Nov 2016 22:04:41 +0100 [thread overview]
Message-ID: <20161105210441.GB1216@lunn.ch> (raw)
In-Reply-To: <20161105203841.9661-1-uwe@kleine-koenig.org>
> +&mdio {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mdio_pins>;
> + status = "okay";
> +
> + phy1: phy at 1 {
> + status = "okay";
> + compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + };
phy.txt says:
- compatible: Compatible list, may contain
"ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for
PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45
specifications. If neither of these are specified, the default is to
assume clause 22.
If the phy's identifier is known then the list may contain an entry
of the form: "ethernet-phy-idAAAA.BBBB" where
AAAA - The value of the 16 bit Phy Identifier 1 register as
4 hex digits. This is the chip vendor OUI bits 3:18
BBBB - The value of the 16 bit Phy Identifier 2 register as
4 hex digits. This is the chip vendor OUI bits 19:24,
followed by 10 bits of a vendor specific ID.
The compatible list should not contain other values than those
listed here.
Please don't list the "marvell,*" names.
Andrew
next prev parent reply other threads:[~2016-11-05 21:04 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-05 20:38 [PATCH RFC] ARM: dts: add support for Turris Omnia Uwe Kleine-König
2016-11-05 21:04 ` Andrew Lunn [this message]
2016-11-05 22:08 ` Uwe Kleine-König
2016-11-06 10:19 ` Andrew Lunn
2016-11-05 21:23 ` Andrew Lunn
2016-11-05 21:27 ` Uwe Kleine-König
2016-11-05 21:37 ` Andrew Lunn
[not found] ` <20161106104534.lsdyppz5qcnjcqe4@perseus.defre.kleine-koenig.org>
[not found] ` <20161106111109.GD9617@lunn.ch>
[not found] ` <20161106141716.fwgje74rhhixnixq@perseus.defre.kleine-koenig.org>
[not found] ` <20161106162809.GA14042@lunn.ch>
2016-11-06 19:32 ` Uwe Kleine-König
2016-11-07 7:41 ` Martin Strbačka
2016-11-14 12:23 ` tomas.hlavacek at nic.cz
2016-11-14 13:10 ` Andrew Lunn
2016-11-14 14:59 ` tomas.hlavacek at nic.cz
2016-11-14 20:16 ` Uwe Kleine-König
2016-11-14 20:28 ` Andrew Lunn
2016-11-19 20:09 ` tomas.hlavacek at nic.cz
2016-11-20 20:30 ` Uwe Kleine-König
2016-11-22 21:59 ` tomas.hlavacek at nic.cz
2016-11-23 0:09 ` [RFC PATCH] ARM: dts: Add " Tomas Hlavacek
2016-11-23 0:35 ` Andrew Lunn
2016-11-24 8:37 ` Uwe Kleine-König
2016-11-24 15:07 ` Andrew Lunn
2016-11-25 12:49 ` Tomas Hlavacek
2016-11-25 14:34 ` Uwe Kleine-König
2016-12-10 8:16 ` Pavel Machek
2016-11-23 8:19 ` Uwe Kleine-König
2016-11-23 0:27 ` [PATCH RFC] ARM: dts: add " tomas.hlavacek at nic.cz
2016-11-23 1:39 ` Andrew Lunn
2016-11-23 14:59 ` Andrew Lunn
2016-11-23 18:36 ` Uwe Kleine-König
2016-11-23 22:45 ` tomas.hlavacek at nic.cz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161105210441.GB1216@lunn.ch \
--to=andrew@lunn$(echo .)ch \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox