Subject: [PATCH] dmaengine: pl330: Fix runtime PM support for terminated transfers

From: [email-masked] (Krzysztof Kozlowski)
Date: Fri, 23 Dec 2016 04:33:24 +0200

On Fri, Dec 16, 2016 at 11:39:11AM +0100, Marek Szyprowski wrote:
> PL330 DMA engine driver is leaking a runtime reference after any terminated
> DMA transactions. This patch fixes this issue by tracking runtime PM state
> of the device and making additional call to pm_runtime_put() in terminate_all
> callback if needed.
> 
> Fixes: ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12")
> Signed-off-by: Marek Szyprowski <[email-masked]>
> ---
>  drivers/dma/pl330.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> index 030fe05ed43b..9f3dbc8c63d2 100644
> --- a/drivers/dma/pl330.c
> +++ b/drivers/dma/pl330.c
> @@ -448,6 +448,9 @@ struct dma_pl330_chan {
>  
>  	/* for cyclic capability */
>  	bool cyclic;
> +
> +	/* for runtime pm tracking */
> +	bool active;
>  };
>  
>  struct pl330_dmac {
> @@ -2031,6 +2034,7 @@ static void pl330_tasklet(unsigned long data)
>  		_stop(pch->thread);
>  		spin_unlock(&pch->thread->dmac->lock);
>  		power_down = true;
> +		pch->active = false;
>  	} else {
>  		/* Make sure the PL330 Channel thread is active */
>  		spin_lock(&pch->thread->dmac->lock);
> @@ -2050,6 +2054,7 @@ static void pl330_tasklet(unsigned long data)
>  			desc->status = PREP;
>  			list_move_tail(&desc->node, &pch->work_list);
>  			if (power_down) {
> +				pch->active = true;

It's been a while since I was playign with the driver so I don't
remember everything... but I can't get the logic behind this.

The device is marked as inactive and scheduled to power down. But you
mark chanel as active.

Maybe it is correct but for me it is unreadable.

I understand that you wanted to mark the device as active at some point,
in case transfer was terminated?

Best regards,
Krzysztof

>  				spin_lock(&pch->thread->dmac->lock);
>  				_start(pch->thread);
>  				spin_unlock(&pch->thread->dmac->lock);
> @@ -2164,6 +2169,7 @@ static int pl330_terminate_all(struct dma_chan *chan)
>  	unsigned long flags;
>  	struct pl330_dmac *pl330 = pch->dmac;
>  	LIST_HEAD(list);
> +	bool power_down = false;
>  
>  	pm_runtime_get_sync(pl330->ddma.dev);
>  	spin_lock_irqsave(&pch->lock, flags);
> @@ -2174,6 +2180,8 @@ static int pl330_terminate_all(struct dma_chan *chan)
>  	pch->thread->req[0].desc = NULL;
>  	pch->thread->req[1].desc = NULL;
>  	pch->thread->req_running = -1;
> +	power_down = pch->active;
> +	pch->active = false;
>  
>  	/* Mark all desc done */
>  	list_for_each_entry(desc, &pch->submitted_list, node) {
> @@ -2191,6 +2199,8 @@ static int pl330_terminate_all(struct dma_chan *chan)
>  	list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
>  	spin_unlock_irqrestore(&pch->lock, flags);
>  	pm_runtime_mark_last_busy(pl330->ddma.dev);
> +	if (power_down)
> +		pm_runtime_put_autosuspend(pl330->ddma.dev);
>  	pm_runtime_put_autosuspend(pl330->ddma.dev);
>  
>  	return 0;
> @@ -2350,6 +2360,7 @@ static void pl330_issue_pending(struct dma_chan *chan)
>  		 * updated on work_list emptiness status.
>  		 */
>  		WARN_ON(list_empty(&pch->submitted_list));
> +		pch->active = true;
>  		pm_runtime_get_sync(pch->dmac->ddma.dev);
>  	}
>  	list_splice_tail_init(&pch->submitted_list, &pch->work_list);
> -- 
> 1.9.1
>