From: quentin.schulz@free-electrons•com (Quentin Schulz)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2 02/25] mfd: axp20x: correct name of temperature data ADC registers
Date: Fri, 27 Jan 2017 09:54:35 +0100 [thread overview]
Message-ID: <20170127085458.18270-3-quentin.schulz@free-electrons.com> (raw)
In-Reply-To: <20170127085458.18270-1-quentin.schulz@free-electrons.com>
The registers 0x56 and 0x57 of AXP22X PMIC store the value of the
internal temperature of the PMIC.
This patch modifies the name of these registers from AXP22X_PMIC_ADC_H/L
to AXP22X_PMIC_TEMP_H/L so their purpose is clearer.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons•com>
---
added in v2
drivers/mfd/axp20x.c | 2 +-
include/linux/mfd/axp20x.h | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 619a83e..9c2fd37 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -102,7 +102,7 @@ static const struct regmap_range axp22x_volatile_ranges[] = {
regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_VBUS_IPSOUT_MGMT),
regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE),
- regmap_reg_range(AXP22X_PMIC_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
+ regmap_reg_range(AXP22X_PMIC_TEMP_H, AXP20X_IPSOUT_V_HIGH_L),
regmap_reg_range(AXP20X_FG_RES, AXP20X_FG_RES),
};
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index a4860bc..5ecadbb 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -228,8 +228,8 @@ enum {
#define AXP20X_OCV_MAX 0xf
/* AXP22X specific registers */
-#define AXP22X_PMIC_ADC_H 0x56
-#define AXP22X_PMIC_ADC_L 0x57
+#define AXP22X_PMIC_TEMP_H 0x56
+#define AXP22X_PMIC_TEMP_L 0x57
#define AXP22X_TS_ADC_H 0x58
#define AXP22X_TS_ADC_L 0x59
#define AXP22X_BATLOW_THRES1 0xe6
--
2.9.3
next prev parent reply other threads:[~2017-01-27 8:54 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-27 8:54 [PATCH v2 00/25] add support for AXP20X and AXP22X power supply drivers Quentin Schulz
2017-01-27 8:54 ` [PATCH v2 01/25] dt-bindings: iio: adc: add AXP20X/AXP22X ADC DT binding Quentin Schulz
2017-01-27 8:54 ` Quentin Schulz [this message]
2017-01-27 9:30 ` [PATCH v2 02/25] mfd: axp20x: correct name of temperature data ADC registers Chen-Yu Tsai
2017-02-08 9:26 ` Lee Jones
2017-01-27 8:54 ` [PATCH v2 03/25] power: supply: axp20x_usb_power: use IIO channels when available Quentin Schulz
2017-01-28 14:36 ` Jonathan Cameron
2017-01-29 16:21 ` Sebastian Reichel
2017-01-27 8:54 ` [PATCH v2 04/25] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs Quentin Schulz
2017-01-28 14:49 ` Jonathan Cameron
2017-01-28 15:12 ` Quentin Schulz
2017-01-28 15:34 ` Jonathan Cameron
2017-01-27 8:54 ` [PATCH v2 05/25] mfd: axp20x: add ADC cells for AXP20X and AXP22X PMICs Quentin Schulz
2017-01-27 8:54 ` [PATCH v2 06/25] ARM: dtsi: axp209: add AXP209 ADC subnode Quentin Schulz
2017-01-31 4:08 ` Chen-Yu Tsai
2017-01-27 8:54 ` [PATCH v2 07/25] ARM: dtsi: axp22x: add AXP22X " Quentin Schulz
2017-01-27 8:54 ` [PATCH v2 08/25] dt-bindings: power: supply: add AXP20X/AXP22X AC power supply Quentin Schulz
2017-01-29 16:22 ` Sebastian Reichel
2017-01-27 8:54 ` [PATCH v2 09/25] iio: adc: axp20x_adc: map acin_i and acin_v Quentin Schulz
2017-01-28 14:51 ` Jonathan Cameron
2017-01-29 16:31 ` Sebastian Reichel
2017-01-27 8:54 ` [PATCH v2 10/25] power: supply: add AC power supply driver for AXP20X and AXP22X PMICs Quentin Schulz
2017-01-29 16:25 ` Sebastian Reichel
2017-01-27 8:54 ` [PATCH v2 11/25] mfd: axp20x: add AC power supply cells for " Quentin Schulz
2017-01-29 16:35 ` Sebastian Reichel
2017-01-31 4:11 ` Chen-Yu Tsai
2017-01-27 8:54 ` [PATCH v2 12/25] ARM: dtsi: axp209: add AC power supply subnode Quentin Schulz
2017-01-31 4:12 ` Chen-Yu Tsai
2017-01-27 8:54 ` [PATCH v2 13/25] ARM: dtsi: axp22x: " Quentin Schulz
2017-01-31 4:13 ` Chen-Yu Tsai
2017-01-27 8:54 ` [PATCH v2 14/25] ARM: dts: sun8i: sina33: enable ACIN " Quentin Schulz
2017-01-31 5:03 ` Chen-Yu Tsai
2017-01-27 8:54 ` [PATCH v2 15/25] ARM: sun5i: chip: " Quentin Schulz
2017-01-31 5:03 ` Chen-Yu Tsai
2017-01-27 8:54 ` [PATCH v2 16/25] dt-bindings: power: supply: add AXP20X/AXP22X battery DT binding Quentin Schulz
2017-01-29 16:47 ` Sebastian Reichel
2017-01-31 7:59 ` Quentin Schulz
2017-01-27 8:54 ` [PATCH v2 17/25] mfd: axp20x: add CHRG_CTRL1/2/3 to writeable regs for AXP20X/AXP22X Quentin Schulz
2017-01-31 5:05 ` Chen-Yu Tsai
2017-01-27 8:54 ` [PATCH v2 18/25] mfd: axp20x: add V_OFF to writeable regs for AXP20X and AXP22X Quentin Schulz
2017-01-27 8:54 ` [PATCH v2 19/25] iio: adc: axp20x_adc: map battery IIO channels Quentin Schulz
2017-01-28 14:52 ` Jonathan Cameron
2017-01-31 5:06 ` Chen-Yu Tsai
2017-01-27 8:54 ` [PATCH v2 20/25] power: supply: add battery driver for AXP20X and AXP22X PMICs Quentin Schulz
2017-01-28 14:54 ` Jonathan Cameron
2017-01-27 8:54 ` [PATCH v2 21/25] mfd: axp20x: add MFD cells for AXP20X and AXP22X battery driver Quentin Schulz
2017-01-27 8:54 ` [PATCH v2 22/25] ARM: dtsi: axp209: add battery power supply subnode Quentin Schulz
2017-01-27 8:54 ` [PATCH v2 23/25] ARM: dtsi: axp22x: " Quentin Schulz
2017-01-27 8:54 ` [PATCH v2 24/25] ARM: dts: sun8i: sina33: enable " Quentin Schulz
2017-01-27 8:54 ` [PATCH v2 25/25] ARM: sun5i: chip: " Quentin Schulz
2017-01-27 9:19 ` [PATCH v2 00/25] add support for AXP20X and AXP22X power supply drivers Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170127085458.18270-3-quentin.schulz@free-electrons.com \
--to=quentin.schulz@free-electrons$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox