Subject: [PATCH 3/6] drivers: firmware: psci: Register with kernel restart handler

From: [email-masked] (Thierry Reding)
Date: Mon, 30 Jan 2017 12:05:09 +0100

From: Guenter Roeck <[email-masked]>

Register with kernel restart handler instead of setting arm_pm_restart
directly. This enables support for replacing the PSCI restart handler
with a different handler if necessary for a specific board.

Select a priority of 129 to indicate a higher than default priority, but
keep it as low as possible since PSCI reset is known to fail on some
boards.

Acked-by: Arnd Bergmann <[email-masked]>
Reviewed-by: Wolfram Sang <[email-masked]>
Tested-by: Wolfram Sang <[email-masked]>
Signed-off-by: Guenter Roeck <[email-masked]>
Acked-by: Lorenzo Pieralisi <[email-masked]>
Signed-off-by: Thierry Reding <[email-masked]>
---
 drivers/firmware/psci.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c
index 66a8793f3b37..ce9814462ce0 100644
--- a/drivers/firmware/psci.c
+++ b/drivers/firmware/psci.c
@@ -232,11 +232,18 @@ static int get_set_conduit_method(struct device_node *np)
 	return 0;
 }
 
-static void psci_sys_reset(enum reboot_mode reboot_mode, const char *cmd)
+static int psci_sys_reset(struct notifier_block *nb, unsigned long action,
+			  void *data)
 {
 	invoke_psci_fn(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0);
+	return NOTIFY_DONE;
 }
 
+static struct notifier_block psci_sys_reset_nb = {
+	.notifier_call = psci_sys_reset,
+	.priority = 129,
+};
+
 static void psci_sys_poweroff(void)
 {
 	invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0);
@@ -513,7 +520,7 @@ static void __init psci_0_2_set_functions(void)
 
 	psci_ops.migrate_info_type = psci_migrate_info_type;
 
-	arm_pm_restart = psci_sys_reset;
+	register_restart_handler(&psci_sys_reset_nb);
 
 	pm_power_off = psci_sys_poweroff;
 }
-- 
2.11.0