Subject: [PATCH 3/5] ARM: dts: am4372: Update operating-points-v2 table for cpu

From: [email-masked] (Lukasz Majewski)
Date: Mon, 6 Mar 2017 17:03:58 +0100

On Mon, 6 Mar 2017 09:23:40 -0600
Dave Gerlach <[email-masked]> wrote:

> The operatings-points-v2 table for am4372 was merged before any user
> of it was present in the kernel and before the binding had been
> finalized. The new ti-cpufreq driver and binding expects the platform
> specific properties to be part of the operating-points-v2 table
> rather than the cpu node so let's move them there as the only user is
> the ti-cpufreq driver.
> 
> Signed-off-by: Dave Gerlach <[email-masked]>

Reviewed-by: Lukasz Majewski <[email-masked]>

> ---
>  arch/arm/boot/dts/am4372.dtsi | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am4372.dtsi
> b/arch/arm/boot/dts/am4372.dtsi index 97fcaf415de1..176e09e9a45e
> 100644 --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -50,15 +50,14 @@
>  			clock-names = "cpu";
>  
>  			operating-points-v2 = <&cpu0_opp_table>;
> -			ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>;
> -			ti,syscon-rev = <&scm_conf 0x600>;
>  
>  			clock-latency = <300000>; /* From
> omap-cpufreq driver */ };
>  	};
>  
> -	cpu0_opp_table: opp_table0 {
> -		compatible = "operating-points-v2";
> +	cpu0_opp_table: opp-table {
> +		compatible = "operating-points-v2-ti-cpu";
> +		syscon = <&scm_conf>;
>  
>  		opp50 at 300000000 {
>  			opp-hz = /bits/ 64 <300000000>;

Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de