Subject: [PATCH 6/9] bus: brcmstb_gisb: correct support for 64-bit address output

From: [email-masked] (Doug Berger)
Date: Fri, 24 Mar 2017 07:46:29 -0700

The GISB bus can support addresses beyond 32-bits.  So this commit
corrects support for reading a captured 64-bit address into a 64-bit
variable by obtaining the high bits from the ARB_ERR_CAP_HI_ADDR
register (when present) and then outputting the full 64-bit value.

It also removes unused definitions.

Fixes: 44127b771d9c ("bus: add Broadcom GISB bus arbiter timeout/error handler")
Signed-off-by: Doug Berger <[email-masked]>
---
 drivers/bus/brcmstb_gisb.c | 36 ++++++++++++++++++++----------------
 1 file changed, 20 insertions(+), 16 deletions(-)

diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index 9eba0143f1a4..c8d2a61d21ed 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -37,8 +37,6 @@
 #define  ARB_ERR_CAP_CLEAR		(1 << 0)
 #define  ARB_ERR_CAP_STATUS_TIMEOUT	(1 << 12)
 #define  ARB_ERR_CAP_STATUS_TEA		(1 << 11)
-#define  ARB_ERR_CAP_STATUS_BS_SHIFT	(1 << 2)
-#define  ARB_ERR_CAP_STATUS_BS_MASK	0x3c
 #define  ARB_ERR_CAP_STATUS_WRITE	(1 << 1)
 #define  ARB_ERR_CAP_STATUS_VALID	(1 << 0)
 
@@ -47,7 +45,6 @@ enum {
 	ARB_ERR_CAP_CLR,
 	ARB_ERR_CAP_HI_ADDR,
 	ARB_ERR_CAP_ADDR,
-	ARB_ERR_CAP_DATA,
 	ARB_ERR_CAP_STATUS,
 	ARB_ERR_CAP_MASTER,
 };
@@ -57,7 +54,6 @@ static const int gisb_offsets_bcm7038[] = {
 	[ARB_ERR_CAP_CLR]	= 0x0c4,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x0c8,
-	[ARB_ERR_CAP_DATA]	= 0x0cc,
 	[ARB_ERR_CAP_STATUS]	= 0x0d0,
 	[ARB_ERR_CAP_MASTER]	= -1,
 };
@@ -67,7 +63,6 @@ static const int gisb_offsets_bcm7400[] = {
 	[ARB_ERR_CAP_CLR]	= 0x0c8,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x0cc,
-	[ARB_ERR_CAP_DATA]	= 0x0d0,
 	[ARB_ERR_CAP_STATUS]	= 0x0d4,
 	[ARB_ERR_CAP_MASTER]	= 0x0d8,
 };
@@ -77,7 +72,6 @@ static const int gisb_offsets_bcm7435[] = {
 	[ARB_ERR_CAP_CLR]	= 0x168,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x16c,
-	[ARB_ERR_CAP_DATA]	= 0x170,
 	[ARB_ERR_CAP_STATUS]	= 0x174,
 	[ARB_ERR_CAP_MASTER]	= 0x178,
 };
@@ -87,7 +81,6 @@ static const int gisb_offsets_bcm7445[] = {
 	[ARB_ERR_CAP_CLR]	= 0x7e4,
 	[ARB_ERR_CAP_HI_ADDR]	= 0x7e8,
 	[ARB_ERR_CAP_ADDR]	= 0x7ec,
-	[ARB_ERR_CAP_DATA]	= 0x7f0,
 	[ARB_ERR_CAP_STATUS]	= 0x7f4,
 	[ARB_ERR_CAP_MASTER]	= 0x7f8,
 };
@@ -109,9 +102,13 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
 {
 	int offset = gdev->gisb_offsets[reg];
 
-	/* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
-	if (offset == -1)
-		return 1;
+	if (offset < 0) {
+		/* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
+		if (reg == ARB_ERR_CAP_MASTER)
+			return 1;
+		else
+			return 0;
+	}
 
 	if (gdev->big_endian)
 		return ioread32be(gdev->base + offset);
@@ -119,6 +116,16 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
 		return ioread32(gdev->base + offset);
 }
 
+static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev)
+{
+	u64 value;
+
+	value = (u64)gisb_read(gdev, ARB_ERR_CAP_ADDR);
+	value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
+
+	return value;
+}
+
 static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
 {
 	int offset = gdev->gisb_offsets[reg];
@@ -185,7 +192,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 					const char *reason)
 {
 	u32 cap_status;
-	unsigned long arb_addr;
+	u64 arb_addr;
 	u32 master;
 	const char *m_name;
 	char m_fmt[11];
@@ -197,10 +204,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 		return 1;
 
 	/* Read the address and master */
-	arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff;
-#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
-	arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
-#endif
+	arb_addr = gisb_read_address(gdev);
 	master = gisb_read(gdev, ARB_ERR_CAP_MASTER);
 
 	m_name = brcmstb_gisb_master_to_str(gdev, master);
@@ -209,7 +213,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 		m_name = m_fmt;
 	}
 
-	pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n",
+	pr_crit("%s: %s@0x%llx [%c %s], core: %s\n",
 		__func__, reason, arb_addr,
 		cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R',
 		cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "",
-- 
2.12.0