Subject: [PATCH 4/8] ARM: dts: imx7s: Add node for GPC

From: [email-masked] (Shawn Guo)
Date: Fri, 14 Apr 2017 11:40:06 +0800

On Thu, Apr 13, 2017 at 06:32:38AM -0700, Andrey Smirnov wrote:
> Add node for GPC and specify as a parent interrupt controller for SoC bus.
> 
> Cc: yurovsky at gmail.com
> Cc: Sascha Hauer <[email-masked]>
> Cc: Fabio Estevam <[email-masked]>
> Cc: Rob Herring <[email-masked]>
> Cc: Mark Rutland <[email-masked]>
> Cc: Russell King <[email-masked]>
> Cc: devicetree at vger.kernel.org
> Cc: linux-kernel at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Signed-off-by: Andrey Smirnov <[email-masked]>
> ---
>  arch/arm/boot/dts/imx7s.dtsi | 27 ++++++++++++++++++++++++++-
>  1 file changed, 26 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> index 8fee299..1a7058f 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -42,6 +42,7 @@
>   */
>  
>  #include <dt-bindings/clock/imx7d-clock.h>
> +#include <dt-bindings/power/imx7-power.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -119,7 +120,7 @@
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  		compatible = "simple-bus";
> -		interrupt-parent = <&intc>;
> +		interrupt-parent = <&gpc>;
>  		ranges;
>  
>  		funnel at 30041000 {
> @@ -301,6 +302,7 @@
>  			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>  			#interrupt-cells = <3>;
>  			interrupt-controller;
> +			interrupt-parent = <&intc>;
>  			reg = <0x31001000 0x1000>,
>  			      <0x31002000 0x2000>,
>  			      <0x31004000 0x2000>,
> @@ -309,6 +311,7 @@
>  
>  		timer {
>  			compatible = "arm,armv7-timer";
> +			interrupt-parent = <&intc>;
>  			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>  				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>  				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> @@ -564,6 +567,28 @@
>  				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
>  				#reset-cells = <1>;
>  			};
> +
> +			gpc: gpc at 303a0000 {
> +				compatible = "fsl,imx7d-gpc";
> +				reg = <0x303a0000 0x10000>;
> +				interrupt-controller;
> +				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> +				#interrupt-cells = <3>;
> +				interrupt-parent = <&intc>;
> +				#power-domain-cells = <1>;
> +
> +				pgc {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					pgc_pcie_phy: pgc-pcie-phy-domain {

The node name should be something generic and has a unit-address when
there is a 'reg' property in the node.

> +						#power-domain-cells = <0>;
> +

Drop this newline.

Shawn

> +						reg = <IMX7_POWER_DOMAIN_PCIE_PHY>;
> +						power-supply = <&reg_1p0d>;
> +					};
> +				};
> +			};
>  		};
>  
>  		aips2: aips-bus at 30400000 {
> -- 
> 2.9.3
>