Subject: [PATCH v2 1/8] dt-bindings: mfd: Add STM32 LPTimer binding

From: [email-masked] (Jonathan Cameron)
Date: Wed, 21 Jun 2017 21:05:38 +0100

On Wed, 21 Jun 2017 16:30:08 +0200
Fabrice Gasnier <[email-masked]> wrote:

> Add documentation for STMicroelectronics STM32 Low-Power Timer binding.
> 
> Signed-off-by: Fabrice Gasnier <[email-masked]>
Looks sensible to me.

Acked-by: Jonathan Cameron <[email-masked]>
> ---
> Changes in v2:
> - Lee's comments: s/Low Power/Low-Power/, remove 0x in example, improve
>   properties descriptions
> ---
>  .../devicetree/bindings/mfd/stm32-lptimer.txt      | 48 ++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
> new file mode 100644
> index 0000000..af859c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/stm32-lptimer.txt
> @@ -0,0 +1,48 @@
> +STMicroelectronics STM32 Low-Power Timer
> +
> +The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several
> +functions:
> +- PWM output (with programmable prescaler, configurable polarity)
> +- Quadrature encoder, counter
> +- Trigger source for STM32 ADC/DAC (LPTIM_OUT)
> +
> +Required properties:
> +- compatible:		Must be "st,stm32-lptimer".
> +- reg:			Offset and length of the device's register set.
> +- clocks:		Phandle to the clock used by the LP Timer module.
> +- clock-names:		Must be "mux".
> +- #address-cells:	Should be '<1>'.
> +- #size-cells:		Should be '<0>'.
> +
> +Optional subnodes:
> +- pwm:			See ../pwm/pwm-stm32-lp.txt
> +- counter:		See ../iio/timer/stm32-lptimer-cnt.txt
> +- trigger:		See ../iio/timer/stm32-lptimer-trigger.txt
> +
> +Example:
> +
> +	lptimer1: lptimer at 40002400 {
> +		compatible = "st,stm32-lptimer";
> +		reg = <0x40002400 0x400>;
> +		clocks = <&timer_clk>;
> +		clock-names = "mux";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		pwm {
> +			compatible = "st,stm32-pwm-lp";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&lppwm1_pins>;
> +		};
> +
> +		trigger at 0 {
> +			compatible = "st,stm32-lptimer-trigger";
> +			reg = <0>;
> +		};
> +
> +		counter {
> +			compatible = "st,stm32-lptimer-counter";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&lptim1_in_pins>;
> +		};
> +	};