Subject: [RESEND,PATCH v4 3/3] crypto : stm32 - Add STM32F4 CRC32 support

From: [email-masked] (Cosar Dindar)
Date: Mon, 17 Jul 2017 19:14:43 +0300

On Mon, Jul 17, 2017 at 02:23:44PM +0000, Lionel DEBIEVE wrote:
> Hi Cosar,
> 
> -	ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
> +	/* For F4 series only CRC32 algorithm will be used */
> +	if (of_device_is_compatible(crc->dev->of_node, "st,stm32f4-crc"))
> +		algs_size = 1;
> +	else
> +		algs_size = ARRAY_SIZE(algs);
> +
> +	ret = crypto_register_shashes(algs, algs_size);
> 
> Should it be better to have a dedicated array per platform data instead? Could be new platform update?
> 
> BR,
> 
> Lionel
>

Hi Lionel,

Thanks for the comment.

It might be better to seperate shash_alg array according to the platform, one alg array for F7 and one for M4.
Adding a new array definition for M4 platform with only CRC-32 algorithm might be enough.
This action would be necessary since it might cause problem while unregistering with your last patch.

BR,

Cosar
 
> 
> On 07/17/2017 10:27 AM, Cosar Dindar wrote:
> > This patch adds CRC (CRC32 Crypto) support for STM32F4 series.
> >
> > As an hardware limitation polynomial and key setting are not supported.
> > They are fixed as 0x4C11DB7 (poly) and 0xFFFFFFFF (key).
> > CRC32C Castagnoli algorithm is not used.
> >
> > Signed-off-by: Cosar Dindar <[email-masked]>
> > Reviewed-by: Fabien Dessenne <[email-masked]>
> > ---
> >   drivers/crypto/stm32/stm32_crc32.c | 68 ++++++++++++++++++++++++++++++++------
> >   1 file changed, 58 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/crypto/stm32/stm32_crc32.c b/drivers/crypto/stm32/stm32_crc32.c
> > index ec83b1e..12fbd98 100644
> > --- a/drivers/crypto/stm32/stm32_crc32.c
> > +++ b/drivers/crypto/stm32/stm32_crc32.c
> > @@ -7,6 +7,7 @@
> >   #include <linux/bitrev.h>
> >   #include <linux/clk.h>
> >   #include <linux/module.h>
> > +#include <linux/of.h>
> >   #include <linux/platform_device.h>
> >   
> >   #include <crypto/internal/hash.h>
> > @@ -39,6 +40,9 @@ struct stm32_crc {
> >   	struct clk       *clk;
> >   	u8               pending_data[sizeof(u32)];
> >   	size_t           nb_pending_bytes;
> > +	bool             key_support;
> > +	bool             poly_support;
> > +	bool             reverse_support;
> >   };
> >   
> >   struct stm32_crc_list {
> > @@ -106,13 +110,31 @@ static int stm32_crc_init(struct shash_desc *desc)
> >   	}
> >   	spin_unlock_bh(&crc_list.lock);
> >   
> > -	/* Reset, set key, poly and configure in bit reverse mode */
> > -	writel(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
> > -	writel(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
> > -	writel(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
> > +	/* set key */
> > +	if (ctx->crc->key_support) {
> > +		writel(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT);
> > +	} else if (mctx->key != CRC_INIT_DEFAULT) {
> > +		dev_err(ctx->crc->dev, "Unsupported key value! Should be: 0x%x\n",
> > +			CRC_INIT_DEFAULT);
> > +		return -EINVAL;
> > +	}
> > +
> > +	/* set poly */
> > +	if (ctx->crc->poly_support)
> > +		writel(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL);
> > +
> > +	/* reset and configure in bit reverse mode if supported */
> > +	if (ctx->crc->reverse_support)
> > +		writel(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR);
> > +	else
> > +		writel(CRC_CR_RESET, ctx->crc->regs + CRC_CR);
> > +
> > +	/* store partial result */
> > +	if (!ctx->crc->reverse_support)
> > +		ctx->partial = bitrev32(readl(crc->regs + CRC_DR));
> > +	else
> > +		ctx->partial = readl(ctx->crc->regs + CRC_DR);
> >   
> > -	/* Store partial result */
> > -	ctx->partial = readl(ctx->crc->regs + CRC_DR);
> >   	ctx->crc->nb_pending_bytes = 0;
> >   
> >   	return 0;
> > @@ -135,7 +157,12 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
> >   
> >   		if (crc->nb_pending_bytes == sizeof(u32)) {
> >   			/* Process completed pending data */
> > -			writel(*(u32 *)crc->pending_data, crc->regs + CRC_DR);
> > +			if (!ctx->crc->reverse_support)
> > +				writel(bitrev32(*(u32 *)crc->pending_data),
> > +				       crc->regs + CRC_DR);
> > +			else
> > +				writel(*(u32 *)crc->pending_data,
> > +				       crc->regs + CRC_DR);
> >   			crc->nb_pending_bytes = 0;
> >   		}
> >   	}
> > @@ -143,10 +170,16 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8,
> >   	d32 = (u32 *)d8;
> >   	for (i = 0; i < length >> 2; i++)
> >   		/* Process 32 bits data */
> > -		writel(*(d32++), crc->regs + CRC_DR);
> > +		if (!ctx->crc->reverse_support)
> > +			writel(bitrev32(*(d32++)), crc->regs + CRC_DR);
> > +		else
> > +			writel(*(d32++), crc->regs + CRC_DR);
> >   
> >   	/* Store partial result */
> > -	ctx->partial = readl(crc->regs + CRC_DR);
> > +	if (!ctx->crc->reverse_support)
> > +		ctx->partial = bitrev32(readl(crc->regs + CRC_DR));
> > +	else
> > +		ctx->partial = readl(crc->regs + CRC_DR);
> >   
> >   	/* Check for pending data (non 32 bits) */
> >   	length &= 3;
> > @@ -243,6 +276,7 @@ static int stm32_crc_probe(struct platform_device *pdev)
> >   	struct stm32_crc *crc;
> >   	struct resource *res;
> >   	int ret;
> > +	int algs_size;
> >   
> >   	crc = devm_kzalloc(dev, sizeof(*crc), GFP_KERNEL);
> >   	if (!crc)
> > @@ -269,13 +303,26 @@ static int stm32_crc_probe(struct platform_device *pdev)
> >   		return ret;
> >   	}
> >   
> > +	/* set key, poly and reverse support if device is of F7 series */
> > +	if (of_device_is_compatible(crc->dev->of_node, "st,stm32f7-crc")) {
> > +		crc->key_support = true;
> > +		crc->poly_support = true;
> > +		crc->reverse_support = true;
> > +	}
> > +
> >   	platform_set_drvdata(pdev, crc);
> >   
> >   	spin_lock(&crc_list.lock);
> >   	list_add(&crc->list, &crc_list.dev_list);
> >   	spin_unlock(&crc_list.lock);
> >   
> > -	ret = crypto_register_shashes(algs, ARRAY_SIZE(algs));
> > +	/* For F4 series only CRC32 algorithm will be used */
> > +	if (of_device_is_compatible(crc->dev->of_node, "st,stm32f4-crc"))
> > +		algs_size = 1;
> > +	else
> > +		algs_size = ARRAY_SIZE(algs);
> > +
> > +	ret = crypto_register_shashes(algs, algs_size);
> >   	if (ret) {
> >   		dev_err(dev, "Failed to register\n");
> >   		clk_disable_unprepare(crc->clk);
> > @@ -304,6 +351,7 @@ static int stm32_crc_remove(struct platform_device *pdev)
> >   
> >   static const struct of_device_id stm32_dt_ids[] = {
> >   	{ .compatible = "st,stm32f7-crc", },
> > +	{ .compatible = "st,stm32f4-crc", },
> >   	{},
> >   };
> >   MODULE_DEVICE_TABLE(of, stm32_dt_ids);