Subject: [PATCH] arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1

From: [email-masked] (Miquel RAYNAL)
Date: Fri, 22 Sep 2017 14:47:49 +0200

Hello Antoine,

On Thu, 21 Sep 2017 09:52:39 +0200
Antoine Tenart <[email-masked]> wrote:

> Hi Miquel,
> 
> On Thu, Sep 21, 2017 at 09:36:43AM +0200, Miquel Raynal wrote:
> > From: Christine Gharzuzi <[email-masked]>
> > +&cps_spi1 {
> > +	status = "okay";
> > +
> > +	spi-flash at 0 {
> > +		#address-cells = <0x1>;
> > +		#size-cells = <0x1>;
> > +		compatible = "jedec,spi-nor";
> > +		reg = <0x0>;
> > +		spi-max-frequency = <20000000>;
> > +
> > +		partitions {
> > +			compatible = "fixed-partitions";
> > +			#address-cells = <1>;
> > +			#size-cells = <1>;
> > +
> > +			partition at 0 {
> > +				label = "Boot";
> > +				reg = <0x0 0x200000>;
> > +			};
> > +			partition at 200000 {
> > +				label = "Filesystem";
> > +				reg = <0x200000 0xd00000>;
> > +			};
> > +			partition at d00000 {  
> 
> The node should be 'partition at f00000'.

Absolutely, thanks for poiting it!

Regards,
Miqu?l

> 
> > +				label = "Boot_2nd";
> > +				reg = <0xf00000 0x100000>;
> > +			};
> > +		};
> > +	};
> > +};  
> 
> Thanks,
> Antoine
> 

-- 
Miquel Raynal, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com