Subject: [PATCH v5 04/30] arm64: KVM: Hide unsupported AArch64 CPU features from guests

From: [email-masked] (Christoffer Dall)
Date: Wed, 1 Nov 2017 05:47:29 +0100

On Tue, Oct 31, 2017 at 03:50:56PM +0000, Dave Martin wrote:
> Currently, a guest kernel sees the true CPU feature registers
> (ID_*_EL1) when it reads them using MRS instructions.  This means
> that the guest may observe features that are present in the
> hardware but the host doesn't understand or doesn't provide support
> for.  A guest may legimitately try to use such a feature as per the
> architecture, but use of the feature may trap instead of working
> normally, triggering undef injection into the guest.
> 
> This is not a problem for the host, but the guest may go wrong when
> running on newer hardware than the host knows about.
> 
> This patch hides from guest VMs any AArch64-specific CPU features
> that the host doesn't support, by exposing to the guest the
> sanitised versions of the registers computed by the cpufeatures
> framework, instead of the true hardware registers.  To achieve
> this, HCR_EL2.TID3 is now set for AArch64 guests, and emulation
> code is added to KVM to report the sanitised versions of the
> affected registers in response to MRS and register reads from
> userspace.
> 
> The affected registers are removed from invariant_sys_regs[] (since
> the invariant_sys_regs handling is no longer quite correct for
> them) and added to sys_reg_desgs[], with appropriate access(),
> get_user() and set_user() methods.  No runtime vcpu storage is
> allocated for the registers: instead, they are read on demand from
> the cpufeatures framework.  This may need modification in the
> future if there is a need for userspace to customise the features
> visible to the guest.
> 
> Attempts by userspace to write the registers are handled similarly
> to the current invariant_sys_regs handling: writes are permitted,
> but only if they don't attempt to change the value.  This is
> sufficient to support VM snapshot/restore from userspace.
> 
> Because of the additional registers, restoring a VM on an older
> kernel may not work unless userspace knows how to handle the extra
> VM registers exposed to the KVM user ABI by this patch.
> 
> Under the principle of least damage, this patch makes no attempt to
> handle any of the other registers currently in
> invariant_sys_regs[], or to emulate registers for AArch32: however,
> these could be handled in a similar way in future, as necessary.
> 
> Signed-off-by: Dave Martin <[email-masked]>
> Reviewed-by: Marc Zyngier <[email-masked]>
> Acked-by: Catalin Marinas <[email-masked]>
> Cc: Christoffer Dall <[email-masked]>
> ---
>  arch/arm64/include/asm/sysreg.h |   3 +
>  arch/arm64/kvm/hyp/switch.c     |   6 +
>  arch/arm64/kvm/sys_regs.c       | 282 +++++++++++++++++++++++++++++++++-------
>  3 files changed, 246 insertions(+), 45 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> index 4dceb12..609d59af 100644
> --- a/arch/arm64/include/asm/sysreg.h
> +++ b/arch/arm64/include/asm/sysreg.h
> @@ -149,6 +149,9 @@
>  #define SYS_ID_AA64DFR0_EL1		sys_reg(3, 0, 0, 5, 0)
>  #define SYS_ID_AA64DFR1_EL1		sys_reg(3, 0, 0, 5, 1)
>  
> +#define SYS_ID_AA64AFR0_EL1		sys_reg(3, 0, 0, 5, 4)
> +#define SYS_ID_AA64AFR1_EL1		sys_reg(3, 0, 0, 5, 5)
> +
>  #define SYS_ID_AA64ISAR0_EL1		sys_reg(3, 0, 0, 6, 0)
>  #define SYS_ID_AA64ISAR1_EL1		sys_reg(3, 0, 0, 6, 1)
>  
> diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
> index 945e79c..35a90b8 100644
> --- a/arch/arm64/kvm/hyp/switch.c
> +++ b/arch/arm64/kvm/hyp/switch.c
> @@ -81,11 +81,17 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
>  	 * it will cause an exception.
>  	 */
>  	val = vcpu->arch.hcr_el2;
> +
>  	if (!(val & HCR_RW) && system_supports_fpsimd()) {
>  		write_sysreg(1 << 30, fpexc32_el2);
>  		isb();
>  	}
> +
> +	if (val & HCR_RW) /* for AArch64 only: */
> +		val |= HCR_TID3; /* TID3: trap feature register accesses */
> +

I still think we should set this in vcpu_reset_hcr() and do it once
instead of adding code in every iteration of the critical path.

Otherwise this patch looks good to me.

Thanks,
-Christoffer