From: manivannan.sadhasivam@linaro•org (Manivannan Sadhasivam)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 3/3] Documentation: add Actions S900 clock bindings
Date: Sat, 4 Nov 2017 14:58:27 +0530 [thread overview]
Message-ID: <20171104092827.GA18680@linaro.org> (raw)
In-Reply-To: <20171102000448.hd3syjfviyy5wwqy@rob-hp-laptop>
On Wed, Nov 01, 2017 at 07:04:48PM -0500, Rob Herring wrote:
> On Wed, Nov 01, 2017 at 01:24:23AM +0530, Manivannan Sadhasivam wrote:
> > This patch adds clock bindings for Actions Semi S900 SoC.
>
> "dt-bindings: clock: " for the subject.
>
> This patch should come before the dts and driver changes.
>
Sure. Will incorporate in next revision.
Thanks,
Mani
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro•org>
> > ---
> > .../bindings/clock/actions,s900-clock.txt | 47 ++++++++++++++++++++++
> > 1 file changed, 47 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/clock/actions,s900-clock.txt
> >
> > diff --git a/Documentation/devicetree/bindings/clock/actions,s900-clock.txt b/Documentation/devicetree/bindings/clock/actions,s900-clock.txt
> > new file mode 100644
> > index 0000000..951d6ad
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/actions,s900-clock.txt
> > @@ -0,0 +1,47 @@
> > +* Actions s900 Clock Controller
> > +
> > +The Actions s900 clock controller generates and supplies clock to various
> > +controllers within the SoC. The clock binding described here is applicable to
> > +s900 SoC.
> > +
> > +Required Properties:
> > +
> > +- compatible: should be "actions,s900-clock"
> > +- reg: physical base address of the controller and length of memory mapped
> > + region.
> > +- #clock-cells: should be 1.
> > +
> > +Each clock is assigned an identifier and client nodes can use this identifier
> > +to specify the clock which they consume.
> > +
> > +All available clocks are defined as preprocessor macros in
> > +dt-bindings/clock/actions,s900-clock.h header and can be used in device
> > +tree sources.
> > +
> > +External clocks:
> > +
> > +The hosc clock used as input for the plls is generated outside the SoC. It is
> > +expected that it is defined using standard clock bindings as "hosc".
> > +
> > +Actions s900 Clock Controller also require two more clocks:
> > + - "losc" - internal low frequency oscillator
> > + - "diff_24M" - internal differential 24MHz clock
> > +
> > +Example: Clock controller node:
> > +
> > + clock: clock-controller at e0160000 {
> > + compatible = "actions,s900-clock";
> > + reg = <0 0xe0160000 0 0x1000>;
> > + #clock-cells = <1>;
> > + };
> > +
> > +Example: UART controller node that consumes clock generated by the clock
> > +controller:
> > +
> > + serial5: uart at e012a000 {
>
> serial at ...
>
> > + compatible = "actions,s900-uart", "actions,owl-uart";
> > + reg = <0x0 0xe012a000 0x0 0x2000>;
> > + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clock CLK_UART5>;
> > + clock-names = "uart";
> > + };
> > --
> > 2.7.4
> >
next prev parent reply other threads:[~2017-11-04 9:28 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-31 19:54 [PATCH 0/3] Add clock driver for Actions S900 SoC Manivannan Sadhasivam
2017-10-31 19:54 ` [PATCH 1/3] arm64: dts: actions: add s900 clock controller nodes Manivannan Sadhasivam
2017-11-02 0:06 ` Rob Herring
2017-11-02 17:55 ` Manivannan Sadhasivam
2017-11-04 9:02 ` Manivannan Sadhasivam
2017-11-04 8:43 ` Andreas Färber
2017-11-04 9:50 ` Manivannan Sadhasivam
2017-10-31 19:54 ` [PATCH 2/3] clk: owl: add clock driver for Actions S900 SoC Manivannan Sadhasivam
2017-11-02 0:02 ` Rob Herring
2017-11-02 18:41 ` Manivannan Sadhasivam
2017-11-04 8:36 ` Andreas Färber
2017-11-04 9:19 ` Manivannan Sadhasivam
2017-11-04 9:30 ` Andreas Färber
2017-11-04 9:54 ` Manivannan Sadhasivam
2017-10-31 19:54 ` [PATCH 3/3] Documentation: add Actions S900 clock bindings Manivannan Sadhasivam
2017-11-02 0:04 ` Rob Herring
2017-11-02 18:47 ` Manivannan Sadhasivam
2017-11-04 9:28 ` Manivannan Sadhasivam [this message]
2017-11-04 8:55 ` Andreas Färber
2017-11-04 9:41 ` Manivannan Sadhasivam
2017-11-04 9:05 ` [PATCH 0/3] Add clock driver for Actions S900 SoC Andreas Färber
2017-11-04 10:04 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171104092827.GA18680@linaro.org \
--to=manivannan.sadhasivam@linaro$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox