Subject: [PATCH 00/12] Marvell NAND controller rework with ->exec_op()

From: [email-masked] (Miquel RAYNAL)
Date: Sun, 7 Jan 2018 22:09:11 +0100

Hi Robert,

On Sun, 07 Jan 2018 21:55:33 +0100
Robert Jarzmik <[email-masked]> wrote:

> Boris Brezillon <[email-masked]> writes:
> 
> > On Wed, 3 Jan 2018 21:10:28 +0100
> > Boris Brezillon <[email-masked]> wrote:  
> >> Hm, that's weird. Can you try with the old driver (pxa3xx)?  
> Ah you're right, my NAND was damaged ...
> 
> > Alternatively, you can type 'nand bad' from uboot to check if it
> > detects the same bad blocks.  
> Mmmh no, the SPL is barebox in my case. Do you have a command in
> linux or barebox to do the same thing ?

Not sure, but nand -i should do the trick.
https://www.barebox.org/doc/latest/commands/hwmanip/nand.html

But I am not sure this is still relevant now we know the NAND was
damaged by the previous experiments (sorry about that). Can you put the
NAND in a clean state and report us if it is still failing?

Thanks for your help,
Miqu?l