Subject: [PATCH v3 7/8] remoteproc: da8xx: use the reset framework

From: [email-masked] (Bartosz Golaszewski)
Date: Fri, 23 Mar 2018 12:47:08 +0100

From: Bartosz Golaszewski <[email-masked]>

Switch to using the reset framework instead of handcoded reset routines
we used so far.

Signed-off-by: Bartosz Golaszewski <[email-masked]>
---
 drivers/remoteproc/da8xx_remoteproc.c | 32 +++++++++++++++++++++++++++-----
 1 file changed, 27 insertions(+), 5 deletions(-)

diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index f134192922e0..3689473f8b49 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -10,6 +10,7 @@
 
 #include <linux/bitops.h>
 #include <linux/clk.h>
+#include <linux/reset.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -20,8 +21,6 @@
 #include <linux/platform_device.h>
 #include <linux/remoteproc.h>
 
-#include <mach/clock.h>   /* for davinci_clk_reset_assert/deassert() */
-
 #include "remoteproc_internal.h"
 
 static char *da8xx_fw_name;
@@ -72,6 +71,7 @@ struct da8xx_rproc {
 	struct da8xx_rproc_mem *mem;
 	int num_mems;
 	struct clk *dsp_clk;
+	struct reset_control *dsp_reset;
 	void (*ack_fxn)(struct irq_data *data);
 	struct irq_data *irq_data;
 	void __iomem *chipsig;
@@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
 	struct device *dev = rproc->dev.parent;
 	struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
 	struct clk *dsp_clk = drproc->dsp_clk;
+	struct reset_control *dsp_reset = drproc->dsp_reset;
 	int ret;
 
 	/* hw requires the start (boot) address be on 1KB boundary */
@@ -155,7 +156,11 @@ static int da8xx_rproc_start(struct rproc *rproc)
 		return ret;
 	}
 
-	davinci_clk_reset_deassert(dsp_clk);
+	ret = reset_control_deassert(dsp_reset);
+	if (ret) {
+		dev_err(dev, "reset_control_deassert() failed: %d\n", ret);
+		return ret;
+	}
 
 	return 0;
 }
@@ -163,8 +168,15 @@ static int da8xx_rproc_start(struct rproc *rproc)
 static int da8xx_rproc_stop(struct rproc *rproc)
 {
 	struct da8xx_rproc *drproc = rproc->priv;
+	int ret;
+
+	ret = reset_control_assert(drproc->dsp_reset);
+	if (ret) {
+		dev_err(rproc->dev.parent,
+			"reset_control_assert() failed: %d\n", ret);
+		return ret;
+	}
 
-	davinci_clk_reset_assert(drproc->dsp_clk);
 	clk_disable_unprepare(drproc->dsp_clk);
 
 	return 0;
@@ -232,6 +244,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
 	struct resource *bootreg_res;
 	struct resource *chipsig_res;
 	struct clk *dsp_clk;
+	struct reset_control *dsp_reset;
 	void __iomem *chipsig;
 	void __iomem *bootreg;
 	int irq;
@@ -268,6 +281,15 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
 		return PTR_ERR(dsp_clk);
 	}
 
+	dsp_reset = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(dsp_reset)) {
+		if (PTR_ERR(dsp_reset) != -EPROBE_DEFER)
+			dev_err(dev, "unable to get reset control: %ld\n",
+				PTR_ERR(dsp_reset));
+
+		return PTR_ERR(dsp_reset);
+	}
+
 	if (dev->of_node) {
 		ret = of_reserved_mem_device_init(dev);
 		if (ret) {
@@ -309,7 +331,7 @@ static int da8xx_rproc_probe(struct platform_device *pdev)
 	 * *not* in reset, but da8xx_rproc_start() needs the DSP to be
 	 * held in reset at the time it is called.
 	 */
-	ret = davinci_clk_reset_assert(drproc->dsp_clk);
+	ret = reset_control_assert(dsp_reset);
 	if (ret)
 		goto free_rproc;
 
-- 
2.16.1