Subject: [PATCH v2] ARM: dts: Add am335x-pocketbeagle

From: [email-masked] (Jonathan Cameron)
Date: Wed, 18 Apr 2018 11:15:08 +0100

On Mon, 16 Apr 2018 17:08:28 -0500
Robert Nelson <[email-masked]> wrote:

> PocketBeagle is an ultra-tiny-yet-complete open-source USB-key-fob computer.
> 
> This board can be indentified by the BPxx value after A335BNLT (BBB)
> in the at24 eeprom:
> BPxx [aa 55 33 ee 41 33 33 35  42 4e 4c 54 42 50 30 30 |.U3.A335BNLTBP00|]
> 
> http://beagleboard.org/pocket
> https://github.com/beagleboard/pocketbeagle
> 
> Signed-off-by: Robert Nelson <[email-masked]>
> CC: Tony Lindgren <[email-masked]>
> CC: Jason Kridner <[email-masked]>
> CC: Drew Fustini <[email-masked]>
> CC: Peter Robinson <[email-masked]>
Hi Robert,

Great to see this.  One small comment, the copyright notices for 2012
seem a little unlikely to be 'complete'.  I guess a lot is copied from
files dating back that far, but not everything so do we not want to
reflect more recent work on these?

Jonathan

> ---
> Changes in v2:
> - Use SPDX tags.
> - Use eeprom at 50, remove repeated node and fix  and remove '_' to fix node_name_chars_strict Warning
> - Fix: PocketBeagle Name in Subject (not PocketBeagle Blue)
> - Fix: leds remove '_' to fix node_name_chars_strict warning
> - Fix: node_name_chars_strict pinmux_*_pins label's.
> ---
>  arch/arm/boot/dts/Makefile                   |   1 +
>  arch/arm/boot/dts/am335x-osd335x-common.dtsi | 124 ++++++++++
>  arch/arm/boot/dts/am335x-pocketbeagle.dts    | 237 +++++++++++++++++++
>  3 files changed, 362 insertions(+)
>  create mode 100644 arch/arm/boot/dts/am335x-osd335x-common.dtsi
>  create mode 100644 arch/arm/boot/dts/am335x-pocketbeagle.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 7e2424957809..5a09ff15743b 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -688,6 +688,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
>  	am335x-pdu001.dtb \
>  	am335x-pepper.dtb \
>  	am335x-phycore-rdk.dtb \
> +	am335x-pocketbeagle.dtb \
>  	am335x-shc.dtb \
>  	am335x-sbc-t335.dtb \
>  	am335x-sl50.dtb \
> diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
> new file mode 100644
> index 000000000000..d2150d207b7a
> --- /dev/null
> +++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
> @@ -0,0 +1,124 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
Seems a little odd not to have a 'slightly' more recent copyright notice
for a device that definitely didn't exist in 2012!

> + *
> + * Author: Robert Nelson <[email-masked]>
> + */
> +
> +/ {
> +	cpus {
> +		cpu at 0 {
> +			cpu0-supply = <&dcdc2_reg>;
> +		};
> +	};
> +
> +	memory at 80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>; /* 512 MB */
> +	};
> +};
> +
> +&cpu0_opp_table {
> +	/*
> +	* Octavo Systems:
> +	* The EFUSE_SMA register is not programmed for any of the AM335x wafers
> +	* we get and we are not programming them during our production test.
> +	* Therefore, from a DEVICE_ID revision point of view, the silicon looks
> +	* like it is Revision 2.1.  However, from an EFUSE_SMA point of view for
> +	* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the 
> +	* EFUSE_SMA register reads as all zeros).
> +	*/
> +	oppnitro-1000000000 {
> +		opp-supported-hw = <0x06 0x0100>;
> +	};
> +};
> +
> +&am33xx_pinmux {
> +	i2c0_pins: pinmux-i2c0-pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* (C17) I2C0_SDA.I2C0_SDA */
> +			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* (C16) I2C0_SCL.I2C0_SCL */
> +		>;
> +	};
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0_pins>;
> +
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	tps: tps at 24 {
> +		reg = <0x24>;
> +	};
> +};
> +
> +/include/ "tps65217.dtsi"
> +
> +&tps {
> +	interrupts = <7>; /* NMI */
> +	interrupt-parent = <&intc>;
> +
> +	ti,pmic-shutdown-controller;
> +
> +	pwrbutton {
> +		interrupts = <2>;
> +		status = "okay";
> +	};
> +
> +	regulators {
> +		dcdc1_reg: regulator at 0 {
> +			regulator-name = "vdds_dpr";
> +			regulator-always-on;
> +		};
> +
> +		dcdc2_reg: regulator at 1 {
> +			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
> +			regulator-name = "vdd_mpu";
> +			regulator-min-microvolt = <925000>;
> +			regulator-max-microvolt = <1351500>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		dcdc3_reg: regulator at 2 {
> +			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
> +			regulator-name = "vdd_core";
> +			regulator-min-microvolt = <925000>;
> +			regulator-max-microvolt = <1150000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		ldo1_reg: regulator at 3 {
> +			regulator-name = "vio,vrtc,vdds";
> +			regulator-always-on;
> +		};
> +
> +		ldo2_reg: regulator at 4 {
> +			regulator-name = "vdd_3v3aux";
> +			regulator-always-on;
> +		};
> +
> +		ldo3_reg: regulator at 5 {
> +			regulator-name = "vdd_1v8";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-always-on;
> +		};
> +
> +		ldo4_reg: regulator at 6 {
> +			regulator-name = "vdd_3v3a";
> +			regulator-always-on;
> +		};
> +	};
> +};
> +
> +&aes {
> +	status = "okay";
> +};
> +
> +&sham {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
> new file mode 100644
> index 000000000000..62fe5cab9fae
> --- /dev/null
> +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
> @@ -0,0 +1,237 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
This one didn't exist back then either ;)

> + *
> + * Author: Robert Nelson <[email-masked]>
> + */
> +/dts-v1/;
> +
> +#include "am33xx.dtsi"
> +#include "am335x-osd335x-common.dtsi"
> +
> +/ {
> +	model = "TI AM335x PocketBeagle";
> +	compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
> +
> +	chosen {
> +		stdout-path = &uart0;
> +	};
> +
> +	leds {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usr_leds_pins>;
> +
> +		compatible = "gpio-leds";
> +
> +		usr0 {
> +			label = "beaglebone:green:usr0";
> +			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +			default-state = "off";
> +		};
> +
> +		usr1 {
> +			label = "beaglebone:green:usr1";
> +			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "mmc0";
> +			default-state = "off";
> +		};
> +
> +		usr2 {
> +			label = "beaglebone:green:usr2";
> +			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "cpu0";
> +			default-state = "off";
> +		};
> +
> +		usr3 {
> +			label = "beaglebone:green:usr3";
> +			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +	};
> +
> +	vmmcsd_fixed: fixedregulator0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vmmcsd_fixed";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> +
> +&am33xx_pinmux {
> +	i2c2_pins: pinmux-i2c2-pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
> +			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
> +		>;
> +	};
> +
> +	ehrpwm0_pins: pinmux-ehrpwm0-pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* (A13) mcasp0_aclkx.ehrpwm0A */
> +		>;
> +	};
> +
> +	ehrpwm1_pins: pinmux-ehrpwm1-pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* (U14) gpmc_a2.ehrpwm1A */
> +		>;
> +	};
> +
> +	mmc0_pins: pinmux-mmc0-pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
> +			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G16) mmc0_dat0.mmc0_dat0 */
> +			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G15) mmc0_dat1.mmc0_dat1 */
> +			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* (F18) mmc0_dat2.mmc0_dat2 */
> +			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* (F17) mmc0_dat3.mmc0_dat3 */
> +			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G18) mmc0_cmd.mmc0_cmd */
> +			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* (G17) mmc0_clk.mmc0_clk */
> +			AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4)		/* (B12) mcasp0_aclkr.mmc0_sdwp */
> +		>;
> +	};
> +
> +	spi0_pins: pinmux-spi0-pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0)	/* (A17) spi0_sclk.spi0_sclk */
> +			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0)	/* (B17) spi0_d0.spi0_d0 */
> +			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* (B16) spi0_d1.spi0_d1 */
> +			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* (A16) spi0_cs0.spi0_cs0 */
> +		>;
> +	};
> +
> +	spi1_pins: pinmux-spi1-pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4)	/* (C18) eCAP0_in_PWM0_out.spi1_sclk */
> +			AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4)	/* (E18) uart0_ctsn.spi1_d0 */
> +			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4)	/* (E17) uart0_rtsn.spi1_d1 */
> +			AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4)	/* (A15) xdma_event_intr0.spi1_cs1 */
> +		>;
> +	};
> +
> +	usr_leds_pins: pinmux-usr-leds-pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)		/* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
> +			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)		/* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
> +			AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7)		/* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
> +			AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7)		/* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
> +		>;
> +	};
> +
> +	uart0_pins: pinmux-uart0-pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* (E15) uart0_rxd.uart0_rxd */
> +			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* (E16) uart0_txd.uart0_txd */
> +		>;
> +	};
> +
> +	uart4_pins: pinmux-uart4-pins {
> +		pinctrl-single,pins = <
> +			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
> +			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* (U17) gpmc_wpn.uart4_txd */
> +		>;
> +	};
> +};
> +
> +&epwmss0 {
> +	status = "okay";
> +};
> +
> +&ehrpwm0 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ehrpwm0_pins>;
> +};
> +
> +&epwmss1 {
> +	status = "okay";
> +};
> +
> +&ehrpwm1 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ehrpwm1_pins>;
> +};
> +
> +&i2c0 {
> +	eeprom: eeprom at 50 {
> +		compatible = "atmel,24c256";
> +		reg = <0x50>;
> +	};
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c2_pins>;
> +
> +	status = "okay";
> +	clock-frequency = <400000>;
> +};
> +
> +&mmc1 {
> +	status = "okay";
> +	vmmc-supply = <&vmmcsd_fixed>;
> +	bus-width = <4>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc0_pins>;
> +	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
> +};
> +
> +&rtc {
> +	system-power-controller;
> +};
> +
> +&tscadc {
> +	status = "okay";
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +		ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
> +		ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
> +		ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins>;
> +
> +	status = "okay";
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart4_pins>;
> +
> +	status = "okay";
> +};
> +
> +&usb {
> +	status = "okay";
> +};
> +
> +&usb_ctrl_mod {
> +	status = "okay";
> +};
> +
> +&usb0_phy {
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	status = "okay";
> +	dr_mode = "otg";
> +};
> +
> +&usb1_phy {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> +
> +&cppi41dma  {
> +	status = "okay";
> +};