Subject: [PATCH V2 2/2] ARM: dts: imx6ul: add GPIO clocks

From: [email-masked] (Shawn Guo)
Date: Thu, 28 Jun 2018 08:52:18 +0800

On Mon, Jun 25, 2018 at 03:14:39AM +0000, Anson Huang wrote:
> Gentle Ping...

I cannot apply this dts patch until the clock patch is landed on
mainline, because it has a dependency on new clock ID IMX6UL_CLK_GPIO1
created by clock patch.

Shawn

> > -----Original Message-----
> > From: Anson Huang
> > Sent: Sunday, June 3, 2018 9:44 AM
> > To: shawnguo at kernel.org; kernel at pengutronix.de; Fabio Estevam
> > <[email-masked]>; robh+dt at kernel.org; mark.rutland at arm.com;
> > mturquette at baylibre.com; sboyd at kernel.org;
> > michael at amarulasolutions.com; matteo.lisi at engicam.com
> > Cc: dl-linux-imx <[email-masked]>; linux-arm-kernel at lists.infradead.org;
> > devicetree at vger.kernel.org; linux-kernel at vger.kernel.org;
> > linux-clk at vger.kernel.org
> > Subject: [PATCH V2 2/2] ARM: dts: imx6ul: add GPIO clocks
> > 
> > i.MX6UL has GPIO clock gates in CCM CCGR, add clock property for GPIO driver
> > to make sure all GPIO banks work as expected.
> > 
> > Signed-off-by: Anson Huang <[email-masked]>
> > ---
> > 	no changes since V1.
> >  arch/arm/boot/dts/imx6ul.dtsi | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
> > index 1241972..405e068 100644
> > --- a/arch/arm/boot/dts/imx6ul.dtsi
> > +++ b/arch/arm/boot/dts/imx6ul.dtsi
> > @@ -437,6 +437,7 @@
> >  				reg = <0x0209c000 0x4000>;
> >  				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
> >  					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> > +				clocks = <&clks IMX6UL_CLK_GPIO1>;
> >  				gpio-controller;
> >  				#gpio-cells = <2>;
> >  				interrupt-controller;
> > @@ -450,6 +451,7 @@
> >  				reg = <0x020a0000 0x4000>;
> >  				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> >  					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> > +				clocks = <&clks IMX6UL_CLK_GPIO2>;
> >  				gpio-controller;
> >  				#gpio-cells = <2>;
> >  				interrupt-controller;
> > @@ -462,6 +464,7 @@
> >  				reg = <0x020a4000 0x4000>;
> >  				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
> >  					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> > +				clocks = <&clks IMX6UL_CLK_GPIO3>;
> >  				gpio-controller;
> >  				#gpio-cells = <2>;
> >  				interrupt-controller;
> > @@ -474,6 +477,7 @@
> >  				reg = <0x020a8000 0x4000>;
> >  				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> >  					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> > +				clocks = <&clks IMX6UL_CLK_GPIO4>;
> >  				gpio-controller;
> >  				#gpio-cells = <2>;
> >  				interrupt-controller;
> > @@ -486,6 +490,7 @@
> >  				reg = <0x020ac000 0x4000>;
> >  				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
> >  					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> > +				clocks = <&clks IMX6UL_CLK_GPIO5>;
> >  				gpio-controller;
> >  				#gpio-cells = <2>;
> >  				interrupt-controller;
> > --
> > 2.7.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html