Subject: [PATCH 3/4] iio: adc: xilinx: Check for return values in clk related functions

From: [email-masked] (Jonathan Cameron)
Date: Sat, 21 Jul 2018 17:24:23 +0100

On Thu, 19 Jul 2018 18:40:26 +0200
Lars-Peter Clausen <[email-masked]> wrote:

> On 07/18/2018 01:12 PM, Manish Narani wrote:
> > This patch adds check for return values from clock related functions.
> > This was reported by static code analysis tool.  
> 
> This patch seems to do something else.
Indeed, definitely doing two things only one of which is mentioned.
Please break it up and resend.

Jonathan

> 
> > 
> > Signed-off-by: Manish Narani <[email-masked]>
> > ---
> >  drivers/iio/adc/xilinx-xadc-core.c | 24 ++++++++++++++++++++++--
> >  1 file changed, 22 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
> > index 248cffa..47eb364 100644
> > --- a/drivers/iio/adc/xilinx-xadc-core.c
> > +++ b/drivers/iio/adc/xilinx-xadc-core.c
> > @@ -322,6 +322,7 @@ static irqreturn_t xadc_zynq_interrupt_handler(int irq, void *devid)
> >  
> >  #define XADC_ZYNQ_TCK_RATE_MAX 50000000
> >  #define XADC_ZYNQ_IGAP_DEFAULT 20
> > +#define XADC_ZYNQ_PCAP_RATE_MAX 200000000
> >  
> >  static int xadc_zynq_setup(struct platform_device *pdev,
> >  	struct iio_dev *indio_dev, int irq)
> > @@ -332,6 +333,7 @@ static int xadc_zynq_setup(struct platform_device *pdev,
> >  	unsigned int div;
> >  	unsigned int igap;
> >  	unsigned int tck_rate;
> > +	int ret;
> >  
> >  	/* TODO: Figure out how to make igap and tck_rate configurable */
> >  	igap = XADC_ZYNQ_IGAP_DEFAULT;
> > @@ -341,6 +343,13 @@ static int xadc_zynq_setup(struct platform_device *pdev,
> >  
> >  	pcap_rate = clk_get_rate(xadc->clk);
> >  
> > +	if (pcap_rate > XADC_ZYNQ_PCAP_RATE_MAX) {
> > +		ret = clk_set_rate(xadc->clk,
> > +				   (unsigned long)XADC_ZYNQ_PCAP_RATE_MAX);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> >  	if (tck_rate > pcap_rate / 2) {
> >  		div = 2;
> >  	} else {
> > @@ -366,6 +375,12 @@ static int xadc_zynq_setup(struct platform_device *pdev,
> >  			XADC_ZYNQ_CFG_REDGE | XADC_ZYNQ_CFG_WEDGE |
> >  			tck_div | XADC_ZYNQ_CFG_IGAP(igap));
> >  
> > +	if (pcap_rate > XADC_ZYNQ_PCAP_RATE_MAX) {
> > +		ret = clk_set_rate(xadc->clk, pcap_rate);
> > +		if (ret)
> > +			return ret;
> > +	}
> > +
> >  	return 0;
> >  }
> >  
> > @@ -887,6 +902,9 @@ static int xadc_write_raw(struct iio_dev *indio_dev,
> >  	unsigned long clk_rate = xadc_get_dclk_rate(xadc);
> >  	unsigned int div;
> >  
> > +	if (!clk_rate)
> > +		return -EINVAL;
> > +
> >  	if (info != IIO_CHAN_INFO_SAMP_FREQ)
> >  		return -EINVAL;
> >  
> > @@ -1239,8 +1257,10 @@ static int xadc_probe(struct platform_device *pdev)
> >  		goto err_free_irq;
> >  
> >  	/* Disable all alarms */
> > -	xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_ALARM_MASK,
> > -		XADC_CONF1_ALARM_MASK);
> > +	ret = xadc_update_adc_reg(xadc, XADC_REG_CONF1, XADC_CONF1_ALARM_MASK,
> > +				  XADC_CONF1_ALARM_MASK);
> > +	if (ret)
> > +		goto err_free_irq;
> >  
> >  	/* Set thresholds to min/max */
> >  	for (i = 0; i < 16; i++) {
> >   
>