Subject: [PATCH v4 22/35] mtd: rawnand: tango: convert driver to nand_scan()

From: [email-masked] (Boris Brezillon)
Date: Sat, 21 Jul 2018 19:52:15 +0200

On Fri, 20 Jul 2018 17:15:14 +0200
Miquel Raynal <[email-masked]> wrote:

> Two helpers have been added to the core to make ECC-related
> configuration between the detection phase and the final NAND scan. Use
> these hooks and convert the driver to just use nand_scan() instead of
> both nand_scan_ident() and nand_scan_tail().
> 
> Signed-off-by: Miquel Raynal <[email-masked]>
> ---
>  drivers/mtd/nand/raw/tango_nand.c | 40 +++++++++++++++++++++++----------------
>  1 file changed, 24 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c
> index dd7a26efdf4f..a448d0797cd5 100644
> --- a/drivers/mtd/nand/raw/tango_nand.c
> +++ b/drivers/mtd/nand/raw/tango_nand.c
> @@ -517,6 +517,28 @@ static int tango_set_timings(struct mtd_info *mtd, int csline,
>  	return 0;
>  }
>  
> +static int tango_attach_chip(struct nand_chip *chip)
> +{
> +	struct nand_ecc_ctrl *ecc = &chip->ecc;
> +
> +	ecc->mode = NAND_ECC_HW;
> +	ecc->algo = NAND_ECC_BCH;
> +	ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
> +
> +	ecc->read_page_raw = tango_read_page_raw;
> +	ecc->write_page_raw = tango_write_page_raw;
> +	ecc->read_page = tango_read_page;
> +	ecc->write_page = tango_write_page;
> +	ecc->read_oob = tango_read_oob;
> +	ecc->write_oob = tango_write_oob;
> +
> +	return 0;
> +}
> +
> +static const struct nand_controller_ops tango_controller_ops = {
> +	.attach_chip = tango_attach_chip,
> +};
> +
>  static int chip_init(struct device *dev, struct device_node *np)
>  {
>  	u32 cs;
> @@ -560,28 +582,14 @@ static int chip_init(struct device *dev, struct device_node *np)
>  			NAND_NO_SUBPAGE_WRITE |
>  			NAND_WAIT_TCCS;
>  	chip->controller = &nfc->hw;
> +	chip->controller->ops = &tango_controller_ops;

Move this assignment here [1]. With that fixed:

Reviewed-by: Boris Brezillon <[email-masked]>

>  	tchip->base = nfc->pbus_base + (cs * 256);
>  
>  	nand_set_flash_node(chip, np);
>  	mtd_set_ooblayout(mtd, &tango_nand_ooblayout_ops);
>  	mtd->dev.parent = dev;
>  
> -	err = nand_scan_ident(mtd, 1, NULL);
> -	if (err)
> -		return err;
> -
> -	ecc->mode = NAND_ECC_HW;
> -	ecc->algo = NAND_ECC_BCH;
> -	ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
> -
> -	ecc->read_page_raw = tango_read_page_raw;
> -	ecc->write_page_raw = tango_write_page_raw;
> -	ecc->read_page = tango_read_page;
> -	ecc->write_page = tango_write_page;
> -	ecc->read_oob = tango_read_oob;
> -	ecc->write_oob = tango_write_oob;
> -
> -	err = nand_scan_tail(mtd);
> +	err = nand_scan(mtd, 1);
>  	if (err)
>  		return err;
>  

[1]https://elixir.bootlin.com/linux/v4.18-rc5/source/drivers/mtd/nand/raw/tango_nand.c#L657