Subject: [PATCH v9 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property

From: [email-masked] (Shawn Guo)
Date: Wed, 12 Sep 2018 09:04:30 +0800

I updated the subject as below to make it clear this is a bindings
change.

  dt-bindings: imx6q-clock: add new fsl,pmic-stby-poweroff property

Patch applied, thanks.

Shawn

On Thu, Aug 02, 2018 at 12:34:20PM +0200, Oleksij Rempel wrote:
> Signed-off-by: Oleksij Rempel <[email-masked]>
> Acked-by: Rob Herring <[email-masked]>
> ---
>  Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> index a45ca67a9d5f..e1308346e00d 100644
> --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> @@ -6,6 +6,14 @@ Required properties:
>  - interrupts: Should contain CCM interrupt
>  - #clock-cells: Should be <1>
>  
> +Optional properties:
> +- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
> +  on power off.
> +  Use this property if the SoC should be powered off by external power
> +  management IC (PMIC) triggered via PMIC_STBY_REQ signal.
> +  Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
> +  be using "syscon-poweroff" driver instead.
> +
>  The clock consumer should specify the desired clock by having the clock
>  ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
>  for the full list of i.MX6 Quad and DualLite clock IDs.
> -- 
> 2.18.0
>