Subject: Re: [PATCH 1/5] dt-bindings: nvmem: add binding for Raspberry Pi OTP

From: Rob Herring <[email-masked]>
Date: Thu, 6 Dec 2018 17:49:41 -0600

On Wed, Nov 21, 2018 at 02:11:40PM +0100, Stefan Wahren wrote:
> This patch adds the devicetree binding for Raspberry Pi customer OTP
> driver.
> 
> Signed-off-by: Stefan Wahren <[email-masked]>
> ---
>  .../nvmem/raspberrypi,bcm2835-customer-otp.txt     | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/nvmem/raspberrypi,bcm2835-customer-otp.txt
> 
> diff --git a/Documentation/devicetree/bindings/nvmem/raspberrypi,bcm2835-customer-otp.txt b/Documentation/devicetree/bindings/nvmem/raspberrypi,bcm2835-customer-otp.txt
> new file mode 100644
> index 0000000..041ff17
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/nvmem/raspberrypi,bcm2835-customer-otp.txt
> @@ -0,0 +1,22 @@
> +Customer OTP Memory for Raspberry Pi
> +
> +The VC4 firmware exposes a mailbox interface that allows the ARM core
> +to access the customer part of the OTP memory.
> +
> +The OTP node must be a child node of the Raspberry Pi firmware node.
> +
> +Required properties :
> +- compatible     : Should be "raspberrypi,bcm2835-customer-otp"

Why do we need this child node? Can't the parent instantiate this?

Are there OTP fields you want to expose in DT?

> +
> +See nvmem.txt for more information.
> +
> +Example:
> +
> +firmware: firmware-rpi {
> +	compatible = "raspberrypi,bcm2835-firmware";
> +	mboxes = <&mailbox>;
> +
> +	customer_otp: otp {
> +		compatible = "raspberrypi,bcm2835-customer-otp";
> +	};
> +};
> -- 
> 2.7.4
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel