Subject: Re: [PATCH] ARM: dts: Add missing ranges for dra7 mcasp l3 ports

From: Tony Lindgren <[email-masked]>
Date: Wed, 12 Dec 2018 07:28:29 -0800

* Peter Ujfalusi <[email-masked]> [181212 08:00]:
> 
> 
> On 08/12/2018 2.54, Tony Lindgren wrote:
> > We need to add mcasp l3 port ranges for mcasp to use a correct l3
> > data port address for dma. And we're also missing the optional clocks
> > that we have tagged with HWMOD_OPT_CLKS_NEEDED in omap_hwmod_7xx_data.c.
> > 
> > Note that for reading the module revision register HWMOD_OPT_CLKS_NEEDED
> > do not seem to be needed. So they could be probably directly managed
> > only by the mcasp driver, and then we could leave them out for the
> > interconnect target module.
> 
> Tested on dra7-evm and dra72-evm. Works nicely, thanks!
> 
> Tested-by: Peter Ujfalusi <[email-masked]>

OK good to hear and thanks for testing. I already pushed this one out
yesterday as I was able to test it myself on beagle-x15.

Regards,

Tony

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel