Subject: Re: [PATCH 7/9] dt-bindings: input: touchscreen: goodix: Add GT5663 compatible

From: Rob Herring <[email-masked]>
Date: Wed, 19 Dec 2018 11:15:53 -0600

On Mon, Dec 03, 2018 at 03:45:45PM +0530, Jagan Teki wrote:
> GT5663 is capacitive touch controller with customized smart wakeup gestures,
> the existing goodix driver will work by phandle vcc-supply regulator.
> 
> So, document compatible and example node for the same.
> 
> Signed-off-by: Jagan Teki <[email-masked]>
> ---
>  .../bindings/input/touchscreen/goodix.txt           | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> index 604766e347ce..1898d3dde8e1 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> @@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller
>  Required properties:
>  
>   - compatible		: Should be "goodix,gt1151"
> +				 or "goodix,gt5663"
>  				 or "goodix,gt911"
>  				 or "goodix,gt9110"
>  				 or "goodix,gt912"
> @@ -42,3 +43,15 @@ Example:
>  
>  		/* ... */
>  	};
> +
> +	touchscreen@5d {
> +		compatible = "goodix,gt5663";

Just a new compatible doesn't warrant a new example.

> +		reg = <0x5d>;
> +		vcc-supply = <&reg_ldo_io0>;
> +		interrupt-parent = <&pio>;
> +		interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
> +		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>;	/* CTP-INT: PH4 */
> +		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;	/* CTP-RST: PH8 */
> +		touchscreen-inverted-x;
> +		touchscreen-inverted-y;
> +	};
> -- 
> 2.18.0.321.gffc6fa0e3
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel