Subject: Re: [PATCH 2/2] arm64: dts: fsl: imx8mq-evk: enable USB nodes for USB3 host

From: Shawn Guo <[email-masked]>
Date: Wed, 16 Jan 2019 18:18:25 +0800

On Tue, Jan 15, 2019 at 12:03:25PM +0100, Lucas Stach wrote:
> Signed-off-by: Lucas Stach <[email-masked]>
> ---
>  arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> index 64acccc4bfcb..ab6d609abce6 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> @@ -137,6 +137,15 @@
>  	status = "okay";
>  };
>  
> +&usb3_phy1 {
> +	status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> +	status = "okay";
> +	dr_mode = "host";

Please flip them.  We usually put 'status' at end of property list.

Shawn

> +};
> +
>  &usdhc1 {
>  	pinctrl-names = "default", "state_100mhz", "state_200mhz";
>  	pinctrl-0 = <&pinctrl_usdhc1>;
> -- 
> 2.20.1
> 

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel