Subject: [PATCH RESEND v2 08/12] dt-bindings: add binding for generic eDP panel

From: Vasily Khoruzhick <[email-masked]>
Date: Sun, 3 Feb 2019 10:54:57 -0800

eDP panels usually have EDID EEPROM, so there's no need to define panel
width/height or any modes/timings in dts. But this panel still may have
regulator and/or backlight.

Signed-off-by: Vasily Khoruzhick <[email-masked]>
---
 .../devicetree/bindings/display/panel/panel-edp.txt        | 7 +++++++
 1 file changed, 7 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/panel-edp.txt

diff --git a/Documentation/devicetree/bindings/display/panel/panel-edp.txt b/Documentation/devicetree/bindings/display/panel/panel-edp.txt
new file mode 100644
index 000000000000..fc7a0868048e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-edp.txt
@@ -0,0 +1,7 @@
+Generic eDP Display Panel
+
+Required properties:
+  - compatible: "panel-edp"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
-- 
2.20.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel